EN 1115-5:1996
(Main)Plastics piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 5: Fitness for purpose of the joints
Plastics piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 5: Fitness for purpose of the joints
This part of prEN 1115 specifies the characteristics of the fitness for purpose of glass-reinforced thermosetting plastics based on polyester resin (GRP-UP) piping systems intended to be used in underground drainage and sewerage under pressure. It also specifies the relevant test parameters for the test methods referred to in this standard.
Kunststoff-Rohrleitungssysteme für erdverlegte Druckentwässerung und Druckabwasserleitungen - Glasfaserverstärkte duroplastische Kunststoffe (GFK) auf Basis von ungesättigtem Polyesterharz (UP) - Teil 5: Gebrauchstauglichkeit der Verbindungen
Dieser Teil von prEN 1115 legt die Charakteristika zur Gebrauchstauglichkeit des Systems von Rohrsystemen aus glasfaserverstärkten duroplastischen Kunststoffenauf der Basis von Polyesterharz (GF-UP) im Bereich von erdverlegter Druckentwässerung und Druckabwasserleitungen fest. Er legt auch die Prüfparameter für Prüfverfahren fest, auf die in dieser Norm verwiesen wird.
Systèmes de canalisations en plastique pour l'évacuation et l'assainissement enterrés sous pression - Plastiques thermodurcissables renforcés de verre (PRV) à base de résine polyester non saturé (UP) - Partie 5: Aptitude à l'emploi des assemblages
La présente partie de la prEN 1115 précise les caractéristiques de l'aptitude à l'emploi des systèmes de canalisations en plastique thermodurcissable renforcé de verre à base de résine polyester (PRV-UP) destinée à l'évacuation et à l'assainissement enterrés sous pression. Elle précise aussi les paramètres d'essai adéquats pour les méthodes d'essai auxquelles il est fait référence dans la présente partie de la norme de systèmes.
Cevni sistemi iz polimernih materialov, položeni v zemljo, za odpadno vodo in kanalizacijo pod tlakom - S steklenimi vlakni ojačeni duromerni materiali (GRP), ki temeljijo na nenasičenih poliestrskih smolah (UP) - 5. del: Potrditev ustreznosti spojev
General Information
- Status
- Withdrawn
- Publication Date
- 18-Jun-1996
- Withdrawal Date
- 04-Apr-2006
- Technical Committee
- CEN/TC 155 - Plastics piping systems and ducting systems
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 05-Apr-2006
- Completion Date
- 05-Apr-2006
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN 1115-5:1996 is a standard published by the European Committee for Standardization (CEN). Its full title is "Plastics piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 5: Fitness for purpose of the joints". This standard covers: This part of prEN 1115 specifies the characteristics of the fitness for purpose of glass-reinforced thermosetting plastics based on polyester resin (GRP-UP) piping systems intended to be used in underground drainage and sewerage under pressure. It also specifies the relevant test parameters for the test methods referred to in this standard.
This part of prEN 1115 specifies the characteristics of the fitness for purpose of glass-reinforced thermosetting plastics based on polyester resin (GRP-UP) piping systems intended to be used in underground drainage and sewerage under pressure. It also specifies the relevant test parameters for the test methods referred to in this standard.
EN 1115-5:1996 is classified under the following ICS (International Classification for Standards) categories: 23.040.20 - Plastics pipes; 23.040.45 - Plastics fittings. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1115-5:1996 has the following relationships with other standards: It is inter standard links to EN 14364:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1115-5:1996 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1115-5:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VSRMHYKunststoff-Rohrleitungssysteme für erdverlegte Druckentwässerung und Druckabwasserleitungen - Glasfaserverstärkte duroplastische Kunststoffe (GFK) auf Basis von ungesättigtem Polyesterharz (UP) - Teil 5: Gebrauchstauglichkeit der VerbindungenSystemes de canalisations en plastique pour l'évacuation et l'assainissement enterrés sous pression - Plastiques thermodurcissables renforcés de verre (PRV) a base de résine polyester non saturé (UP) - Partie 5: Aptitude a l'emploi des assemblagesPlastics piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetti
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...