iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM D2066-06

(Test Method)

Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions

Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions

SCOPE
1.1 These test methods cover procedures for determining the relative tinting strength of paste-type printing ink dispersions by visual or instrumental evaluation of tints prepared by manual or automated mixing.
1.2 These test methods are applicable to paste-type printing inks, flushed pigments, and other pigment dispersions that are essentially nonvolatile under ordinary room conditions and for which there is a wet reference standard of the same pigmentation and consistency. With proper choice of tinting base, they are applicable to dispersions of any color, including black and white.
Note 1—The instrumental procedures for tinting strength are similar in principle to those described in Test Methods D 387, D 2745, D 4838, and D 6531.
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

Status
Historical
Publication Date
31-Mar-2006
ICS
87.080 - Inks. Printing inks
Technical Committee
D01 - Paint and Related Coatings, Materials, and Applications
Drafting Committee
D01.56 - Printing Inks
Current Stage
Ref Project

Relations

Replaces
ASTM D2066-03e1 - Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions
Effective Date
01-Apr-2006
Replaced By
ASTM D2066-07 - Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions
Effective Date
01-Jul-2007
Referred By
ASTM D7188-05(2019) - Standard Terminology for Printing Inks, Materials, and Processes
Effective Date
01-Apr-2006
Referred By
ASTM D6531-00(2019) - Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement
Effective Date
01-Apr-2006
Referred By
ASTM D6336-11(2021) - Standard Practice for Evaluation of Flushing Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer
Effective Date
01-Apr-2006

Buy Standard

ASTM D2066-06 - Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink DispersionsASTM D2066-06 - Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions
PreviousNext
Standard
ASTM D2066-06 - Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions
English language
7 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:D2066–06
Standard Test Methods for
Relative Tinting Strength of Paste-Type Printing Ink
1
Dispersions
This standard is issued under the fixed designation D2066; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope* D2745 Test Method for RelativeTinting Strength ofWhite
Pigments by Reflectance Measurements
1.1 These test methods cover procedures for determining
D4838 Test Method for Determining the Relative Tinting
the relative tinting strength of paste-type printing ink disper-
Strength of Chromatic Paints
sions by visual or instrumental evaluation of tints prepared by
D6531 Test Method for RelativeTinting Strength ofAque-
manual or automated mixing.
ous Ink Systems by Instrumental Measurement
1.2 These test methods are applicable to paste-type printing
E284 Terminology of Appearance
inks, flushed pigments, and other pigment dispersions that are
E1331 Test Method for Reflectance Factor and Color by
essentially nonvolatile under ordinary room conditions and for
Spectrophotometry Using Hemispherical Geometry
which there is a wet reference standard of the same pigmen-
E1347 Test Method for Color and Color-Difference Mea-
tationandconsistency.Withproperchoiceoftintingbase,they
surement by Tristimulus (Filter) Colorimetry
are applicable to dispersions of any color, including black and
E1349 Test Method for Reflectance Factor and Color by
white.
Spectrophotometry Using Bidirectional (45°:0° or 0°:45°)
NOTE 1—Theinstrumentalproceduresfortintingstrengtharesimilarin
Geometry
principle to those described in Test Methods D387, D2745, D4838, and
2.2 ANSI Standards:
D6531.
3
PH 2.17 Geometric Conditions for Reflection Density
1.3 The values stated in SI units are to be regarded as the
PH 2.18 Spectral Conditions for the Measurement of Opti-
3
standard. The values given in parentheses are for information
cal Density
only.
PH 2.30 Viewing Conditions for Graphic Arts and
1.4 This standard does not purport to address all of the
Photography—ColorPrints,TransparenciesandPhotome-
3
safety concerns, if any, associated with its use. It is the
chanical Reproductions
responsibility of the user of this standard to establish appro-
priate safety and health practices and determine the applica- 3. Terminology
bility of regulatory limitations prior to use.
3.1 Definitions relating to color attributes and color differ-
ences are covered in Terminology D16 and E284.
2. Referenced Documents
3.2 Definitions of Terms Specific to This Standard:
2
2.1 ASTM Standards:
3.2.1 masstone (or masscolor), n—the color of a material
D16 Terminology for Paint, Related Coatings, Materials,
that is thick enough to mask any background.
and Applications
3.2.2 tinting strength, n—the ability of a material to impart
D387 Test Method for Color and Strength of Chromatic
its color to a standard base; the reciprocal of the relative
Pigments with a Mechanical Muller
concentration required to match the reference material in a
D2244 Practice for Calculation of Color Tolerances and
standard base.
Color Differences from Instrumentally Measured Color
3.2.3 undertone (or undercolor), n—the color of a thin film
Coordinates
of a material.
4. Summary of Test Methods
4.1 Thin and thick films of the standard and unknown
1
These test methods are under the jurisdiction of ASTM Committee D01 on
dispersions are drawn down in juxtaposition on bond and on
Paint and Related Coatings, Materials, and Applications and are the direct
responsibility of Subcommittee D01.56 on Printing Inks. coated paper. Visual evaluation of the relative undertone and
Current edition approved April 1, 2006. Published May 2006. Originally
masstone provides a check on color equivalency.
e1
approved in 1991. Last previous edition approved in 2003 as D2066–03 .
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
3
Standards volume information, refer to the standard’s Document Summary page on Available fromAmerican National Standards Institute (ANSI), 25 W. 43rd St.,
the ASTM website. 4th Floor, New York, NY 10036.
*A Summary of Changes section appears at the end of this standard.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
D2066–06
4.2 Thestandardandunknowndispersionsareeachreduced 6.7 Reflectance Measuring Instrument, (for instrumental
to the same concentration in a suitable tinting base. Thick wet evaluation).Unlessotherwiseagreedupon,theinstrumentshall
drawdownsofthetw
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM D6419-00(2023)(Test Method)
Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks

SIGNIFICANCE AND USE
4.1 This test method is the procedure of choice for determining volatile content of sheet-fed and coldset web offset inks. This information is useful to the ink manufacturer and user and to environmental interests as part of the determination of the mass of volatile organic compounds emitted from the ink.
Note 3: Since these inks do not contain water or any materials currently classified by US EPA as negligibly photochemically reactive (exempt solvents), volatile organic compound content is the same as volatile content. The volatile organic compounds in these inks are high boiling hydrocarbon oils which are, according to US EPA guidelines, 95 % retained in the printed substrate or oxidized into the ink film. Therefore, the mass of volatile organic compound emitted from the ink would be calculated as only 5 % of the volatile organic compound content of the ink as derived from the results of this test method.
SCOPE
1.1 This test method describes a procedure for determination of the weight percent volatile content of sheet-fed and coldset web offset printing inks. Test specimens are heated at 110 °C ± 1 °C for 60 min.
Note 1: Coldset web offset printing is often (also) referred to as non-heatset web offset printing.  
1.2 This test method is also applicable to sheet-fed and coldset web offset printing ink vehicles.
Note 2: Vehicle is the liquid portion of the printing ink. Any substance that is dissolved in the liquid portion of the ink is a part of the vehicle.  
1.3 This test method is not applicable to ultra-violet (UV) or electron beam cured materials, which must be cured by exposure to UV light or an electron beam as part of the test for volatile content.  
1.4 This test method is based on Test Method D2369, in which the allowable ranges are ±0.1 g for specimen weight and ±5 °C for oven temperature. Interlaboratory studies have shown that specimen weight and oven temperature must both be more tightly controlled in order to improve the precision of test results for sheet-fed and coldset web-offset inks. Such inks typically contain a wide range of high-boiling hydrocarbons and often have a volatile content below 25 %.  
1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For a specific hazard statement see 7.5.1  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D7514-14(2022)(Test Method)
Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment

SIGNIFICANCE AND USE
5.1 This standard may be used by paint companies and raw material suppliers to assess effectiveness of interior architectural primers for blocking stains from bleeding through to a topcoat.  
5.2 In practice, different ink-stained substrates may give various results for stainblocking performance for a primer and topcoat system. As such, this test method may be used for a number of different ink-stained surfaces.
SCOPE
1.1 This standard provides a method for evaluating the ability of an architectural paint system to block ink stains from markers and writing instruments from bleeding through a primer into a topcoat.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM D7867-13(2020)(Test Method)
Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature

SIGNIFICANCE AND USE
5.1 The viscosity of paint, inks and many related liquid materials is dependent on temperature. It is useful to know the extent of this dependence. One use of such information is to prepare a viscosity-temperature table or curve. Then, if ambient conditions do not allow the measurement of viscosity at the exact temperature stated in a specification or regulation, the viscosity measured at ambient temperature can be used to determine the viscosity at the temperature of interest through the use of the previously prepared table or curve. Viscosity measurements that cover a range of shear rates as well as temperatures could include shear rates associated with paint application or allow extrapolation to such shear rates. This information would enable a producer or user to estimate the effect on application of heating the paint.
SCOPE
1.1 These test methods cover the use of rotational viscometers to determine the dependence of apparent viscosity of paints, inks and related liquid materials on temperature. The first method uses a standard rotational viscometer with concentric cylinder geometry running at a fixed rotational speed as the temperature is increased or decreased. The second method uses a rotational viscometer with cone and plate geometry running at a fixed rotational speed as the temperature is increased or decreased. The third method uses concentric cylinder or cone/plate geometry operated with a shear rate ramp at several discrete temperatures.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D7836-13(2020)(Test Method)
Standard Test Methods for Measurement of Yield Stress of Paints, Inks and Related Liquid Materials

SIGNIFICANCE AND USE
5.1 The yield stress of a material is a measure of the amount of force required to initiate movement of that material in a pipe, through a pump, or from nozzle. The yield stress also characterizes the ability of the material to maintain particles in suspension. Along with viscosity measurements, yield stress measurements have been useful in establishing root causes of flow problems such as excessive orange peel and sagging and in explaining resistance to such problems. After a coating has been applied, flow and leveling tends to be inversely related to yield stress and sag resistance tends to be directly related to yield stress. The ability of an automotive basecoat to keep aluminum and/or mica flakes oriented has been related to yield stress (direct relationship).
SCOPE
1.1 These test methods cover three approaches for determining yield stress values of paints, inks and related liquid materials using rotational viscometers. The first method uses a rotational viscometer with coaxial cylinder, cone/plate, or plate/plate geometry. The second method uses a rheometer operating in controlled stress mode with similar geometries. The third method uses a viscometer with a vane spindle.  
1.2 A non-rotational technique, the falling needle viscometer (FNV), also can be used to measure yield stress values in paints, inks and related materials. See Test Methods D5478, Test Method D, Yield Stress Determination for details.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D5909-20(Test Method)
Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance

SIGNIFICANCE AND USE
5.1 Inadequate setting or drying of sheetfed inks, or both, can cause blocking of stacked prints with subsequent loss of product. “Setting” of an ink refers to the rapid rise in viscosity of the printed ink film, sometimes accompanied by surface drying, that prevents transference of the undried ink film to adjacent surfaces under light pressure. “Setting” is a property of the ink-substrate combination. Inadequate drying may be due to several factors, but the primary causes are: (1) omission of metallic driers from the ink, improper ink formulation (2) unusual ink-substrate interactions, and (3) use of a fountain solution that is too acidic. If the test prints are made on a standard laboratory proof press, where there is no application of fountain solution, then only the first three possible causes can be evaluated. If the prints have been made on a commercial production printing press or some other acceptable means of introducing the fountain solution into the ink agreed upon, then the effect of fountain solution can be determined. It will often be necessary to run several tests to isolate the specific cause of a drying problem.  
5.2 This test method is suitable for most combinations of oxidative drying inks and substrates. Because this test method relies on a visual assessment of the extent of drying, very light colors and clear varnishes may present difficulties in quantifying the extent of drying. In such cases, the supplier and the customer should agree upon an alternative method of assessing the drying properties of the ink.
SCOPE
1.1 This test method covers the procedure for determining the drying time of oxidative-drying printing inks (also referred to as “sheetfed inks”) by squalene resistance of printed ink films.  
1.2 This test method is applicable to all paste inks that dry primarily by oxidation regardless of the substrate on which they are printed. With appropriate changes in the test fluid, it may also be used with paste inks that dry by other mechanisms, such as heatset or ultraviolet light.  
1.3 This test method utilizes a modified rub tester and is intended to serve as a “referee” procedure when laboratories, using less rigorous test procedures (see Appendix X1), cannot agree on their results.  
1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D7734/D7734M-13(2020)(Test Method)
Standard Test Method for Determination of Open Time of Oxidative Printing Inks and Overprint Varnishes by a Manual Method

SIGNIFICANCE AND USE
3.1 When formulating printing inks and overprint varnishes that dry primarily by oxidation it is important to know the stay open time so that premature drying does not occur on the printing press rollers and other components.  
3.2 The applied ink or OPV film used for testing is thicker than the film printed on the substrate and nominally represents the film on the printing press rollers.
SCOPE
1.1 This test method covers a manual procedure for determining the stay open time of oxidative drying printing inks and overprint varnishes by a finger transfer method. Open is defined as a wet ink/varnish film.  
1.2 The amount of time required to reach the endpoint is recorded in hours.  
1.3 Typical inks and overprint varnishes that dry by oxidation are oil based sheetfed offset, letterpress, and screen inks.  
1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D4942-20(Test Method)
Standard Test Methods for Water Pickup of Lithographic Printing Inks and Vehicles in a Laboratory Mixer

SIGNIFICANCE AND USE
3.1 The lithographic printing process requires that some dampening solution be emulsified into the ink. These test methods provide a rapid means for determining water pickup under laboratory conditions. Test results may be useful for specification acceptance between the supplier and the customer.  
3.2 In order that results be comparable, the tests must be run at the same temperature and with the same type and quantity of liquid added prior to mixing.  
3.3 The emulsions obtained in these test methods are of larger particle size than those typically produced in printing nips. Because of these and other variables in the printing process, water pickup results do not by themselves predict lithographic printing performance.
SCOPE
1.1 These test methods cover two procedures for determining the amount of water picked up by lithographic printing inks in a laboratory mixer.  
1.2 Test Method A covers single-point water pickup; Test Method B covers the rate of water pickup. Both test methods are applicable to any printing ink and vehicle intended for the lithographic printing process.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM D1316-20(Test Method)
Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer

SIGNIFICANCE AND USE
5.1 Oversize particles in a printing ink may damage a printing plate, plug a cell, clog a nozzle and adversely affect the appearance of printed ink films. Fineness of grind measurements are useful for deciding when to stop the dispersion process and for determining if the test material meets specifications as agreed upon between the supplier and the customer.
SCOPE
1.1 This test method describes the procedure for determining the fineness of grind of printing inks using a NPIRI Grindometer. It evaluates the size of the largest particles in a finished dispersion but not average particle size or concentration of sizes.  
1.2 This test method covers both manual and automatic drawdowns using an A1 scraper.  
1.3 This test method is applicable to any dispersion that is fine enough to fall within the 0 to 25 μm range of the specified grind gauge. With a minor variation in procedure, it is applicable to both paste (nonvolatile) and liquid (volatile) inks.  
Note 1: The 0 to 25 μm gauge specified in this test method is similar in principle to the 0 to 100 μm Hegman gauge described in Test Method D1210 and the various gauges described in ISO 1524:2000. Sieve analysis for concentration of particles above 45 μm is covered in Test Method D2067.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    6 pages
    English language
    sale 15% off
ASTM
ASTM D6488-08(2020)(Terminology)
Standard Terminology Relating to Print Problems

SIGNIFICANCE AND USE
3.1 A common set of definitions is essential to improve communication and avoid misunderstanding among ink makers, substrate makers, and printers.  
3.2 The term “paper” in this standard also encompasses the term “paperboard.”  
3.3 Definitions that are verbatim from one of the referenced sources are indicated by giving the acronym of the organization or the author of the book at the end of the definition.
SCOPE
1.1 This terminology standard gives definitions for problems that develop with printed matter as a result of deficiencies in the ink, substrate, press, or combinations thereof.  
1.2 These definitions cover the three major printing processes and are given in the following sequence: lithography, flexography, and gravure. For further information see Refs (1-4) at the end of this standard.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    6 pages
    English language
    sale 15% off
ASTM
ASTM D6688-20(Practice)
Standard Practice for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Technique

SIGNIFICANCE AND USE
4.1 Many types of printed matter, notably container labels, packaging materials, magazine and book covers, must be resistant to liquid materials that may contact them advertently or inadvertently. This practice permits an assessment of resistance of printed matter to several types of liquids.  
4.2 The requirement that a reference print be run at the same time as the test print minimizes effects of atmospheric conditions (humidity and temperature) and other variations which may develop.  
4.3 This practice can be used to determine whether new formulations are suitable for the end-use purpose and for specification acceptance between producer and user.
SCOPE
1.1 This practice covers the evaluation of the relative resistance of printed matter to liquid chemicals, as evidenced by lack of discoloration, bleeding, or loss of gloss.  
1.2 This practice utilizes a sandwich procedure similar in principle to ISO/TC 130 N 589. Spotting or immersion procedures are covered in Test Methods D1308, D1647, and D2248.  
1.3 This practice is applicable to prints on any flat substrate including paper, paperboard, metallic foil, metal plate, and plastic films, and produced by any printing process including letterpress, offset lithography, flexography, gravure, silk screen, and non-impact.  
1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 7.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off