ASTM F1070-19

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation:F1070 −19 An American National Standard
Standard Specification for
1
Doors, Non-Tight, for Marine Use
This standard is issued under the fixed designation F1070; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
3
1. Scope 2.2 ABS Standard:
Rules for Building and Classing Steel Vessels
1.1 This specification to be used in conjunction with Speci-
4
2.3 Military Standards:
fication F1073, covers the principal dimensions and the me-
MIL-P-17549 Plastic Laminates, Fibrous Glass Reinforced,
chanical requirements for manufacturing steel, aluminum, and
Marine Structural
glass-reinforced plastic non-tight, personnel doors and dutch
MIL-R-21607 Resins, Polyester Low-Pressure Laminating,
doors, with the exception of joiner, joiner dutch doors, and
Fire Retardant
expanded metal doors, for marine use.
MIL-P-24441 Epoxy-Polyamide Paint
1.2 The doors will be used in non-tight bulkheads.
MIL-C-81706 Coating, Aluminum and Aluminum Alloys
MIL-PRF-24635 Silicone-Alkyd Enamel Paint Weather-
1.3 When fire protection requirements are applicable to the
Resistant, Exterior Use
location of these doors, then the use of aluminum and glass-
NAVSEA SI 009-32 Cleaning and Painting Requirements;
reinforced plastic doors shall be unacceptable.
accomplish
1.4 The values stated in inch-pound units are to be regarded
3. Ordering Information
as standard. The values given in parentheses are mathematical
conversions to SI units that are provided for information only
3.1 Ordering for doors under this specification shall include
and are not considered standard.
the following:
3.1.1 Type of door and material (see Table 1 and Figs. 1-3),
1.5 This international standard was developed in accor-
3.1.2 Nominal and ASTM designations,
dance with internationally recognized principles on standard-
3.1.3 Quantity, hand of door (right hand or left hand, or
ization established in the Decision on Principles for the
both), and
Development of International Standards, Guides and Recom-
3.1.4 Optional items, such as fixed lights, door locks, to be
mendations issued by the World Trade Organization Technical
indicated.
Barriers to Trade (TBT) Committee.
3.2 Inspection and acceptance of doors shall be agreed upon
2. Referenced Documents
between the purchaser and the supplier.
2
2.1 ASTM Standards:
4. Materials and Manufacture
A36/A36M Specification for Carbon Structural Steel
4.1 The materials and specifications shall be as given in
A131/A131M Specification for Structural Steel for Ships
Table 1.
B209 Specification for Aluminum and Aluminum-Alloy
Sheet and Plate
4.2 Glass-reinforced plastic (GRP) material of doors shall
F1073 Specification for Door Fittings, for Watertight
meet the requirements of MIL-P-17549, Grade 1. In addition,
/Gastight /Airtight, Weathertight, and Non-Tight Doors,
laminate must have the flammability limits equal to the
for Marine Use
requirements for Grade 2, Class A of MIL-R-21607.
5. Construction, Shape, and Dimensions
1
This specification is under the jurisdiction of ASTM Committee F25 on Ships 5.1 The construction, shape, and clear opening dimensions
and Marine Technology and is the direct responsibility of Subcommittee F25.03 on
shall be as shown in Tables 1 and 2 and Figs. 1-3 and conform
Outfitting and Deck Machinery.
to the following requirements:
Current edition approved March 1, 2019. Published March 2019. Originally
approved in 1987. Last previous edition approved in 2012 as F1070 – 87 (2012).
DOI: 10.1520/F1070-19.
2 3
For referenced ASTM standards, visit the ASTM website, www.astm.org, or Available from American Bureau of Shipping (ABS), ABS Plaza, 16855
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Northchase Dr., Houston, TX 77060, http://www.eagle.org.
4
Standards volume information, refer to the standard’s Document Summary page on Available from DLA Document Services, Building 4/D, 700 Robbins Ave.,
the ASTM website. Philadelphia, PA 19111-5094, http://quicksearch.dla.mil.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
F1070−19
TABLE 1 Standard Door Materials
Number Component Mild Steel Aluminum Glass-Reinforced Plastic (GRP)
1 door panel Specifications A36/A36M or A131/A131M Specification B209 MIL-P-17549, Grade 1
2 stiffeners Specifications A36/A36M or A131/A131M Specification B209 integral
TABLE 2 Door—Non-Tight
6.
...