ASTM F2123-09

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
An American National Standard
Designation:F2123–05 Designation: F 2123 – 09
Standard Practice for
1
Treestand Instructions
This standard is issued under the fixed designation F 2123; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This practice provides guidance for providing user instructions for treestands.
1.2The values stated are in inch-pound units and are to be regarded as standard.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical
conversions to SI units that are provided for information only and are not considered standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory
limitations prior to use.
2. Terminology
2.1 The terminology and definitions in the referenced documents are applicable to this practice.
2.2 Definitions:
2.2.1 backbar or V-barbackbar or V-bar, n—the adjustable component of a climbing treestand or handclimber that engages the
tree to provide support. The backbar may be rigid or flexible.
2.2.2 climbing stickclimbing stick, n—a device to assist climbing a tree primarily to a fixed position treestand.Astructure that
is secured to the tree and allows the user to support his weight and climb to the desired height on the tree.
2.2.3 climbing treestandclimbing treestand, n—a treestand that provides both the means to ascend the tree, and allow the user
to remain at a desired elevation.
2.2.4 handclimber, or climbing aidhandclimber, or climbing aid, n—a device to assist climbing with a climbing treestand. A
structure that allows the user to support his weight when lifting a climbing treestand with his legs.
2.2.5 ladder treestand, n—a treestand that consists of a ladder with an attached platform and is secured to the tree at the
elevation where the platform is located. (The
2.2.5.1 Discussion—The ladder treestand may be secured to the tree at other locations and has steps that are used to reach the
platform or hunting position.)
2.2.6 non-climbing, fixed position or hang-on treestand, n—a treestand that is secured to the tree at the elevation where it is
used. (The
2.2.6.1 Discussion—The user usually ascends the tree by some means and then lifts the treestand to the desired position and
secures it for use.) use.
2.2.7 platform, n—the horizontal structural area of a treestand on which the user stands and/oror places his feet, or both.
2.2.8 treestandtreestand, n—a device designed to be affixed to a tree or its branches so as to permit an individual to sit or stand
thereon for the purpose of attaining an elevated position from which to observe, photograph or hunt.
2.2.9 tripod or tower stand—a tripod or tower stand is constructed to be self-supporting and is not required to be secured to
a tree. tripod or tower stand, n—a tripod or tower stand (free standing platform) is constructed to be self-supporting and is not
required to be secured to a tree.
2.2.10 suspension relief device, n—a device to allow relief of a person’s weight on the lower extremities if suspended in a
harness.
2.2.10.1 Discussion—The device is to help maintain circulation in the legs and help prevent suspension trauma (blood pooling).
3. Summary of Practice
3.1 This practice provides minimum guidelines for the selection, content and placement of user instructions for treestands
particularly for quality assurance and adequacy of safety.
1
This practice is under the jurisdiction ofASTM Committee F08 on Sports Equipment and Facilities and is the direct responsibility of Subcommittee F08.16 onArchery
Products.
Current edition approved Oct. 15, 2005. Published October 2005. Originally approved in 2001. Last previous edition approved in 2001 as F2123–01.
Current edition approved Feb. 1, 2009. Published February 2009. Originally approved in 2001. Last previous edition approved in 2005 as F 2123 – 05.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
F2123–09
4. Significance and Use
4.1This practice is provided to develop and maintain un
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
An American National Standard
Designation:F2123–05 Designation: F 2123 – 09
Standard Practice for
1
Treestand Instructions
This standard is issued under the fixed designation F 2123; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This practice provides guidance for providing user instructions for treestands.
1.2The values stated are in inch-pound units and are to be regarded as standard.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical
conversions to SI units that are provided for information only and are not considered standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory
limitations prior to use.
2. Terminology
2.1 The terminology and definitions in the referenced documents are applicable to this practice.
2.2 Definitions:
2.2.1 backbar or V-barbackbar or V-bar, n—the adjustable component of a climbing treestand or handclimber that engages the
tree to provide support. The backbar may be rigid or flexible.
2.2.2 climbing stickclimbing stick, n—a device to assist climbing a tree primarily to a fixed position treestand.Astructure that
is secured to the tree and allows the user to support his weight and climb to the desired height on the tree.
2.2.3 climbing treestandclimbing treestand, n—a treestand that provides both the means to ascend the tree, and allow the user
to remain at a desired elevation.
2.2.4 handclimber, or climbing aidhandclimber, or climbing aid, n—a device to assist climbing with a climbing treestand. A
structure that allows the user to support his weight when lifting a climbing treestand with his legs.
2.2.5 ladder treestand, n—a treestand that consists of a ladder with an attached platform and is secured to the tree at the
elevation where the platform is located. (The
2.2.5.1 Discussion—The ladder treestand may be secured to the tree at other locations and has steps that are used to reach the
platform or hunting position.)
2.2.6 non-climbing, fixed position or hang-on treestand, n—a treestand that is secured to the tree at the elevation where it is
used. (The
2.2.6.1 Discussion—The user usually ascends the tree by some means and then lifts the treestand to the desired position and
secures it for use.) use.
2.2.7 platform, n—the horizontal structural area of a treestand on which the user stands and/oror places his feet, or both.
2.2.8 treestandtreestand, n—a device designed to be affixed to a tree or its branches so as to permit an individual to sit or stand
thereon for the purpose of attaining an elevated position from which to observe, photograph or hunt.
2.2.9 tripod or tower stand—a tripod or tower stand is constructed to be self-supporting and is not required to be secured to
a tree. tripod or tower stand, n—a tripod or tower stand (free standing platform) is constructed to be self-supporting and is not
required to be secured to a tree.
2.2.10 suspension relief device, n—a device to allow relief of a person’s weight on the lower extremities if suspended in a
harness.
2.2.10.1 Discussion—The device is to help maintain circulation in the legs and help prevent suspension trauma (blood pooling).
3. Summary of Practice
3.1 This practice provides minimum guidelines for the selection, content and placement of user instructions for treestands
particularly for quality assurance and adequacy of safety.
1
This practice is under the jurisdiction ofASTM Committee F08 on Sports Equipment and Facilities and is the direct responsibility of Subcommittee F08.16 onArchery
Products.
Current edition approved Oct. 15, 2005. Published October 2005. Originally approved in 2001. Last previous edition approved in 2001 as F2123–01.
Current edition approved Feb. 1, 2009. Published February 2009. Originally approved in 2001. Last previous edition approved in 2005 as F 2123 – 05.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
F2123–09
4. Significance and Use
4.1This practice is provided to develop and maintain un
...