76/117/EEC - Electrical apparatus for potentially explosive atmospheres (Framework Directive)
Council Directive 76/117/EEC aims to harmonize the laws of EU Member States regarding electrical equipment designed for use in potentially explosive atmospheres. It covers electrical devices likely to encounter explosive gases, vapors, hazes, or dusts, excluding mining and medical equipment. The Directive mandates that such equipment must either conform to harmonized standards or, if differing, be certified as offering an equivalent level of safety following inspection by approved bodies. Certificates of conformity and inspection certificates, validated by a distinctive mark, facilitate free movement of compliant equipment across Member States. The Directive establishes procedures for certificate issuance, withdrawal, and surveillance of manufacturing processes. It also sets up a committee to adapt standards to technical progress and addresses provisional safety measures if equipment poses hazards despite compliance. Installation conditions remain under national laws unless discriminatory. The Directive reinforces uniform safety practices and removes trade barriers in the electrical equipment sector while allowing for technical adaptations and ensuring adequate communication among Member States and the Commission.
Purpose
Directive 76/117/EEC aims to harmonize the laws of EU Member States concerning electrical equipment intended for use in potentially explosive atmospheres. Recognizing that national safety regulations vary and thus hinder trade, the Directive establishes common technical standards or equivalent safety measures to ensure the free movement and safe use of such equipment across the EU. It also sets up procedures to adapt these technical standards to technological progress and safeguards against risks posed by certified equipment that might still represent safety hazards.
Key Obligations
Harmonization of Standards: Electrical equipment used in potentially explosive atmospheres must comply with harmonized technical standards or provide an equivalent degree of safety if differing from those standards.
Certification and Marking: Equipment conformity with harmonized standards is certified through a certificate of conformity, validated by a distinctive mark on the equipment. Alternatively, if the equipment deviates from standards but offers equivalent safety, it must undergo a special inspection resulting in an inspection certificate, also validated by the distinctive mark.
Inspection Bodies: Member States must designate approved bodies responsible for issuing certificates of conformity and inspection certificates, and for conducting thorough inspections covering documentation, construction, and assembly.
Surveillance: Member States are required to implement adequate surveillance of the manufacturing processes to ensure ongoing compliance.
Safety Safeguards: If a Member State finds that certified equipment poses a safety hazard, it may provisionally prohibit its sale or impose special conditions, informing other Member States and the Commission. The Commission will then consult and issue opinions or propose adaptations to the Directive as needed.
Instructions for Use: Where necessary, equipment must be accompanied by instructions outlining special conditions for safe use.
Non-Discrimination: Installation laws must not discriminate against equipment manufactured in other Member States.
Procedural Mechanisms: A committee is established to oversee the adaptation of the Directive to technical progress, including modifications to standards and inspection procedures, following defined voting and consultation rules.
Affected Products and Actors
Products: The Directive applies to electrical equipment designed for use in potentially explosive atmospheres - spaces where dangerous levels of flammable gases, vapors, hazes or dusts may be present. It excludes equipment specifically designed for underground mining operations prone to fire damp and medical electrical equipment.
Actors:
- Manufacturers who must ensure compliance, certification, appropriate marking, and provide instructions as required.
- Approved bodies designated by Member States that issue certificates and perform inspections.
- Member States responsible for surveillance, enforcement, notification of approved bodies, and safeguarding market safety.
- The European Commission and a specialized committee that manage technical adaptations and resolve issues related to standardization and safety risks.
Implementation Timeline
Member States were required to take all necessary preparatory measures within 18 months following the notification of the first specific related Directive.
Certification bodies and their details must be communicated to the Commission and other Member States within three months of notification of this Directive.
The Directive provides for ongoing adaptation procedures for technical progress since the technical specifications need regular update to reflect advancements.
Provisions for swift response exist if safety concerns arise, ensuring quick consultations and potential adaptations or restrictions by Member States and the Commission.
This Directive applies to electrical equipment intended for use in potentially explosive atmospheres, excluding equipment designed for underground work in mines subject to fire damp and medical equipment. It covers any electrical device or constituent part of an electrical installation capable of operating in environments where dangerous quantities of flammable substances in the form of gas, vapour, haze, or dust may mix with air to create potentially explosive mixtures. The Directive aims to harmonize safety standards across Member States to facilitate the free movement and safe use of such electrical equipment, ensuring it complies either with harmonized technical standards or offers an equivalent degree of safety as verified by an approved inspection body. Installation conditions remain subject to national regulations, provided they do not discriminate against equipment manufactured in other Member States.
Die Richtlinie 76/117/EWG dient der Angleichung der Rechtsvorschriften der EU-Mitgliedstaaten im Bereich elektrischer Betriebsmittel für den Einsatz in explosionsgefährdeten Atmosphären. Sie legt fest, dass solche Betriebsmittel entweder den harmonisierten Normen entsprechen oder durch eine zugelassene Stelle geprüft werden müssen, um ein mindestens gleichwertiges Sicherheitsniveau zu gewährleisten. Die Konformitäts- oder Kontrollbescheinigung sowie ein entsprechendes Kennzeichen sind Voraussetzung für das Inverkehrbringen und die freie Verwendung dieser Betriebsmittel innerhalb der Mitgliedstaaten. Ausgenommen sind Betriebsmittel für untertägige, schlagwettergefährdete Gruben sowie elektromedizinische Geräte. Zur Anpassung an den technischen Fortschritt sieht die Richtlinie ein Verfahren vor, bei dem ein Ausschuss aus Mitgliedstaatenvertretern und der Kommission mitwirkt. Zudem ermöglicht sie vorläufige nationale Schutzmaßnahmen, falls trotz Bescheinigung eine Gefahr besteht. Ziel ist die Förderung des freien Warenverkehrs bei gleichzeitigem Schutz vor explosionsbedingten Risiken.
Zweck
Die Richtlinie 76/117/EWG zielt darauf ab, die unterschiedlichen nationalen Rechtsvorschriften der Mitgliedstaaten über elektrische Betriebsmittel für den Einsatz in explosionsgefährdeter Atmosphäre anzugleichen. Diese Unterschiede behindern den freien Warenverkehr innerhalb der Europäischen Gemeinschaft. Durch die Festlegung harmonisierter technischer Normen und eines Prüfverfahrens soll sichergestellt werden, dass elektrische Betriebsmittel ein hohes Sicherheitsniveau bieten. Zudem werden Verfahren zur Anpassung an den technischen Fortschritt sowie Maßnahmen zur Verhinderung unsicherer Produkte eingeführt.
Wesentliche Verpflichtungen
- Konformitätsnachweis: Elektrische Betriebsmittel müssen gemäß harmonisierten Normen geprüft und zertifiziert sein. Die Konformitätsbescheinigung wird durch zugelassene Stellen ausgestellt.
- Alternativer Nachweis: Betriebsmittel, die nicht den harmonisierten Normen entsprechen, können dennoch zugelassen werden, wenn eine besondere Bauartprüfung ihre gleichwertige Sicherheit bestätigt (Kontrollbescheinigung).
- Kennzeichnung: Betriebsmittel müssen mit einem bestimmten Unterscheidungszeichen versehen sein, das die Übereinstimmung mit Typprüfung und den Bescheinigungen bestätigt.
- Information und Gebrauchsanweisung: Falls erforderlich, muss eine Gebrauchsanweisung mit besonderen Benutzungsbedingungen beigelegt werden.
- Überwachung: Die Mitgliedstaaten sind verpflichtet, die Herstellung und den Marktüberwachungsprozess zu gewährleisten.
- Einschränkungen bei Gefahren: Ein Mitgliedstaat kann das Inverkehrbringen von Betriebsmitteln vorläufig untersagen, wenn erhebliche Sicherheitsbedenken bestehen. Über solche Maßnahmen wird die Kommission informiert und ein Konsultationsverfahren eingeleitet.
- Anpassung an den technischen Fortschritt: Ein Ausschuss, bestehend aus Vertretern der Mitgliedstaaten und der Kommission, begleitet die Aktualisierung der technischen Vorschriften. Änderungen werden nach festgelegtem Verfahren beschlossen.
- Informationsaustausch: Mitgliedstaaten übermitteln Listen zugelassener Prüfstellen und Empfänger wichtiger Schriftwechsel an andere Mitgliedstaaten und die Kommission.
Betroffene Produkte und Akteure
- Produkte: Die Richtlinie gilt für alle elektrischen Betriebsmittel, die in explosionsgefährlicher Atmosphäre verwendet werden, d.h. in Bereichen mit brennbaren Gasen, Dämpfen, Nebeln oder Stäuben, die explosive Gemische mit Luft bilden können. Ausgenommen sind Betriebsmittel für untertägige Gruben mit Schlagwettergefahr sowie elektromedizinische Geräte.
- Akteure: Hersteller, die elektrische Betriebsmittel produzieren und in der Gemeinschaft in Verkehr bringen; zugelassene Stellen, die Prüfungen und Bescheinigungen ausstellen; die Mitgliedstaaten, die Marktüberwachung betreiben und gegebenenfalls Schutzmaßnahmen ergreifen; die Europäische Kommission, die bei technischen Anpassungen und Streitfällen eingebunden ist.
Umsetzungszeitplan
- Die Mitgliedstaaten müssen innerhalb von 18 Monaten nach Bekanntgabe der ersten Einzelrichtlinie die notwendigen Maßnahmen getroffen haben, um die Richtlinie umzusetzen.
- Listen der zugelassenen Prüfstellen und Empfänger relevanter Informationen sind spätestens drei Monate nach Bekanntgabe der Richtlinie zu übermitteln.
- Die Richtlinie ist von allen Mitgliedstaaten bindend und verpflichtet sie zur Anpassung ihrer nationalen Vorschriften innerhalb des festgelegten Zeitrahmens.
Diese Richtlinie bildet eine Basisregelung für die Harmonisierung im Bereich explosionsgeschützter elektrischer Betriebsmittel und unterstützt somit die Gewährleistung von Produktsicherheit und freien Warenverkehr innerhalb der Europäischen Gemeinschaft.
Die Richtlinie 76/117/EWG gilt für elektrische Betriebsmittel zur Verwendung in explosionsgefährdeter Atmosphäre, mit Ausnahme von Betriebsmitteln, die in untertägigen, schlagwettergefährdeten Gruben eingesetzt werden, sowie elektromedizinischer Ausrüstungen. Elektrische Betriebsmittel umfassen alle Teile elektrischer Anlagen und betriebsmäßig stromführende Geräte. Explosionsgefährdete Atmosphären sind Bereiche, in denen brennbare Stoffe in Form von Gasen, Dämpfen, Nebeln oder Stäuben mit Luft explosionsfähige Gemische bilden können. Die Richtlinie regelt insbesondere die Sicherheitsanforderungen und die Konformitätsbewertung dieser Betriebsmittel, um den freien Warenverkehr innerhalb der EU zu gewährleisten und dennoch ein hohes Sicherheitsniveau zu garantieren. Dabei wird die Übereinstimmung mit harmonisierten Normen oder einem mindestens gleichwertigen Sicherheitsniveau verlangt.
La directive 76/117/CEE vise à harmoniser les législations des États membres concernant le matériel électrique utilisé dans les atmosphères explosibles, afin de faciliter la libre circulation de ces équipements tout en garantissant la sécurité. Elle exclut les matériels destinés aux mines grisouteuses souterraines et le matériel électromédical. Le matériel doit être conforme à des normes harmonisées reconnues ou, à défaut, prouver un niveau de sécurité équivalent via un certificat délivré par un organisme agréé. Ces certificats garantissent la conformité et assurent un contrôle rigoureux, avec un marquage distinctif apposé sur les équipements. La directive instaure également un comité chargé d’adapter les normes au progrès technique, ainsi qu’une procédure d’alerte en cas de danger malgré la conformité. Les États membres doivent garantir la surveillance de la fabrication et peuvent provisoirement interdire le matériel dangereux, en informant la Commission et les autres États. Cette réglementation assure la sécurité et la libre circulation dans un cadre technique commun, tout en tenant compte de l’évolution technologique.
Objet
La directive 76/117/CEE vise à harmoniser les législations des États membres de la Communauté économique européenne concernant le matériel électrique utilisable en atmosphères explosibles. Elle a pour but d’éliminer les divergences nationales qui entravent la libre circulation de ce type de matériel en assurant que seuls les équipements respectant des normes techniques harmonisées ou offrant un niveau de sécurité équivalent puissent être commercialisés et utilisés.
Obligations principales
- Conformité aux normes harmonisées : Le matériel électrique destiné à être utilisé en atmosphères explosibles doit être conforme aux normes harmonisées, ce qui est attesté par un certificat de conformité délivré par un organisme agréé. Le matériel doit aussi porter un marquage distinctif indiquant cette conformité.
- Équivalence en sécurité : Si le matériel ne suit pas les normes harmonisées mais offre un niveau de sécurité équivalent, un certificat de contrôle peut être délivré par un organisme agréé après un examen spécial.
- Libre circulation et usage : Les États membres ne peuvent pas interdire la mise sur le marché, la libre circulation ou l’usage conforme de ce matériel, sous réserve de la présentation des certificats et du marquage requis.
- Surveillance et contrôle : Les États membres doivent assurer une surveillance efficace de la fabrication pour garantir la conformité continue du matériel.
- Procédure de mise à jour des normes : Une procédure est instituée pour adapter rapidement les normes techniques au progrès technique via un comité spécialisé composé de représentants des États membres et de la Commission.
- Mesures de sauvegarde : En cas de danger avéré, un État membre peut provisoirement limiter ou interdire la mise sur le marché d’un matériel même s’il est conforme, tout en informant la Commission et les autres États membres. La Commission analyse la situation et prend les mesures appropriées.
Produits et acteurs concernés
- Produits affectés : Toute partie constitutive d’installations électriques ou dispositifs mettant en œuvre l'électricité utilisés en atmosphères explosives, à l’exception du matériel destiné aux travaux souterrains des mines grisouteuses et du matériel électromédical.
- Acteurs concernés :
- Les fabricants de matériel électrique en atmosphère explosible
- Les organismes agréés chargés d’examiner le matériel, de délivrer les certificats de conformité et de contrôle
- Les autorités compétentes nationales chargées du contrôle, de la surveillance et de la mise en œuvre de la directive
- Le comité pour l’adaptation au progrès technique, qui siège pour réviser les normes et procédures
Calendrier de mise en œuvre
- Notification et communication : Chaque État membre doit communiquer la liste des organismes agréés aux autres États membres et à la Commission dans un délai maximum de trois mois après notification de la directive.
- Entrée en vigueur des mesures : Les États membres disposent d’un délai de dix-huit mois suivant la notification de la première directive particulière relative à ce matériel pour prendre toutes mesures préparatoires nécessaires à l’application de la directive.
- Procédures d’adaptation technique : Les adaptations des normes et des procédures sont gérées par le comité et, si nécessaire, par la Commission ou le Conseil suivant une procédure définie, afin de suivre l’évolution technologique.
Cette directive instaure un cadre harmonisé garantissant la sécurité et la libre circulation du matériel électrique utilisé en atmosphères potentiellement explosives au sein de la Communauté européenne, en tenant compte à la fois des avancées techniques et des exigences nationales de sécurité.
La directive 76/117/CEE concerne le matériel électrique destiné à être utilisé en atmosphères explosibles, c’est-à-dire dans des environnements où peuvent se trouver des substances inflammables sous forme de gaz, vapeurs, brouillards ou poussières susceptibles de former des mélanges explosifs avec l’air. Elle s’applique à toutes les parties constitutives des installations électriques ou dispositifs utilisant l’électricité, à l’exception du matériel destiné aux travaux souterrains dans les mines grisouteuses et du matériel électromédical. La directive vise à harmoniser les normes techniques pour garantir la sécurité de ce matériel et faciliter sa libre circulation sur le marché intérieur de l’Union européenne, en exigeant notamment la conformité aux normes harmonisées ou un niveau de sécurité équivalent attesté par des organismes agréés. Elle couvre la fabrication, la mise sur le marché, ainsi que les conditions d’usage conformes à sa destination spécifique.
General Information
There are no results that match your search criteria
Frequently Asked Questions
An EU Directive is a legislative act of the European Union that sets out goals that all EU member states must achieve. However, it is up to each member state to devise their own laws on how to reach these goals through national transposition. Directives are used to harmonize laws across the EU, particularly for the functioning of the single market.
Directive 76/117/EEC covers "Electrical apparatus for potentially explosive atmospheres (Framework Directive)". There are 0 standards associated with this directive.
Harmonized standards under 76/117/EEC are European standards (ENs) developed by CEN, CENELEC, or ETSI in response to a mandate from the European Commission. When these standards are cited in the Official Journal of the European Union, products manufactured in conformity with them benefit from a presumption of conformity with the essential requirements of 76/117/EEC, facilitating CE marking and free movement within the European Economic Area.