Monthly Overview: Domestic and Commercial Equipment, Entertainment, Sports Standards – May 2025

Looking back at May 2025, the landscape for Domestic and Commercial Equipment, Entertainment, and Sports standards was notably active, with five significant standards published in the sector. These documents collectively addressed energy efficiency, environmental sustainability, emissions control, and product safety, particularly for residential heating technologies and domestic electrical appliances. For professionals tasked with regulatory compliance, engineering, procurement, or research, this monthly retrospective provides a structured synthesis of notable documents, reveals patterns influencing the sector’s trajectory, and offers concrete insights to support ongoing adherence and technological alignment.

Monthly Overview: May 2025

May 2025 stood out as a month marked by substantial updates in the Residential Heating subdomain and household electrical safety within the Domestic and Commercial Equipment, Entertainment, and Sports sector. The publication activity, driven by revisions in European regulatory frameworks and a wave of innovation in energy-efficient appliances, focused intensively on liquid and solid fuel-burning units and heated electrical products.

The standards published reveal a dual emphasis: enhancing operational efficiency (including energy labelling and sustainability) and responding to climate-driven policy updates around fuels, emissions, and consumer safety. When compared to preceding periods, this month saw a coordinated approach from standardization bodies—particularly CEN and CLC—in aligning new documents with both EU legislative requirements and current market demands. The result is a clearer, more enforceable set of benchmarks for manufacturers and suppliers as they address changes in the European and global marketplace.

Standards Published This Month

EN 1-1:2025 – General Requirements for Residential Liquid Fuel Burning Appliances

Residential Liquid Fuel Burning Appliances – Part 1: General Requirements and Test Methods

EN 1-1:2025 sets the foundational specifications for residential appliances intended for space heating using liquid fuels, excluding built-in types and those equipped with atomizing burners or integrated boilers. The standard outlines design, construction, safety, performance (including detailed efficiency and emissions metrics), as well as conformity assessment procedures such as initial type testing and factory production control.

One of the major changes from previous revisions is a comprehensive integration of EU regulatory requirements for energy efficiency and environmental performance. Specific test methods are now established for key pollutants (CO, NOx, organic gaseous carbon), smoke number assessments, and emissions measurement, reinforcing alignment with sustainability objectives. The document also introduces systematic marking, installation, and user instructions, reflecting the sector’s increased focus on end-user safety and lifecycle traceability.

Industries impacted include manufacturers and installers of liquid fuel residential heating appliances, testing laboratories, and energy regulators. The document closely interfaces with European eco-labelling directives and national performance schemes.

Key highlights:

• Detailed efficiency and emissions requirements (CO, NOx, OGC, smoke number)
• Lifecycle environmental sustainability requirements (materials, end-of-life, labelling)
• Robust conformity processes: type testing, factory control, marking, documentation

Access the full standard:View EN 1-1:2025 on iTeh Standards

EN 1-2:2025 – Flued Oil Stoves with Vaporizing Burners

Residential Liquid Fuel Burning Appliances – Part 2: Flued Oil Stoves with Vaporizing Burners

Building upon the general framework of EN 1-1:2025, this standard provides specific technical and safety requirements for oil stoves with vaporizing burners (nominal heating capacity ≤ 15 kW) used for residential space heating. It excludes built-in appliances, atomizing burners, and any systems tied to water heating or boilers, focusing sharply on vaporizing burner technologies for fuel oil and kerosene.

Key procedural specifications include emissions control (CO, NOx, OGC, smoke number), protection of combustible materials, efficiency criteria, and procedures for assessment and verification of constancy of performance (AVCP). Additionally, it sets mandates for marking, installation, and operational documentation for safer end-user adoption and long-term compliance.

The standard directly informs manufacturers, testing bodies, and residential energy authorities on the safe and efficient design and installation of liquid-fueled stoves. Alignment with Commission Regulation (EU) 2015/1186 and Regulation 2024/1103 positions EN 1-2:2025 at the intersection of environmental standards and consumer product safety.

Key highlights:

• Dedicated procedures for emissions measurement and efficiency certification
• Enhanced requirements for user safety and installation
• Assessment and AVCP protocols linked to EU product regulations

Access the full standard:View EN 1-2:2025 on iTeh Standards

EN 16510-2-10:2025 – Multi-Firing Sauna Stoves Fired by Wood Logs

Residential Solid Fuel Burning Appliances – Part 2-10: Multi-Firing Sauna Stoves Fired by Natural Wood Logs

Superseding the earlier EN 15821:2010, the new EN 16510-2-10:2025 comprehensively addresses the design, construction, safety, efficiency, and emissions of multi-firing sauna stoves intended for residential use and heated by natural wood logs. These appliances are defined by the use of separated heating stones and the capability for multiple fuel loads. The standard explicitly excludes single-firing designs and those incorporating electrical or mechanical controls.

Procedure and compliance requirements encompass product assembly (either factory-assembled or modular), emissions measurement (CO, NOx, OGC, particulate matter), protection against the risk of burning fuel and flue gas spillage, and systematic approaches to factory production control and environmental validation. This structure reflects mounting attention to both occupant safety and alignment with evolving European energy and building codes.

The standard’s audience includes manufacturers of sauna stoves, wellness facility specifiers, installation contractors, and regulatory agencies concerned with fire safety and emissions. The document fully aligns with recent EU sustainability directives and assessment protocols (AVCP).

Key highlights:

• Rigorous emissions and efficiency criteria for wood-fueled sauna appliances
• Procedures for product conformity, including modular assembly and pre-fabrication
• New requirements for environmental sustainability

Access the full standard:View EN 16510-2-10:2025 on iTeh Standards

EN 16510-2-7:2025 – Combination Appliances Fired by Wood Logs and Pellets

Residential Solid Fuel Burning Appliances – Part 2-7: Combination Appliances Fired by Wood Logs and Pellets

EN 16510-2-7:2025 addresses combination appliances (space heaters, inset appliances, cookers) that can be manually fueled with wood logs and mechanically fueled with wood pellets, focusing on solutions for residential heating and, in some cases, cooking. The scope includes both freestanding and inset appliances but has strict exclusions regarding certain boiler pressures, horizontal exhaust, and non-automatic pellet loading.

The standard provides requirements for construction, emissions (CO, NOx, OGC, PM), fuel management, protection of combustible materials, and assessment/verification of consistency of performance (AVCP). Importantly, it stipulates energy efficiency measurement, auxiliary power usage, and mandates that all relevant test methods are referenced.

EN 16510-2-7:2025 is relevant for appliance manufacturers developing dual-fuel products, certification bodies, installers, and regulatory professionals ensuring permits for new heating technologies. It closely interacts with current and emerging EU energy labelling frameworks.

Key highlights:

• Comprehensive technical and safety criteria for dual-fuel appliances
• Detailed AVCP processes and energy efficiency measurement
• Substantial exclusions and clarifications for specialized hybrid systems

Access the full standard:View EN 16510-2-7:2025 on iTeh Standards

EN IEC 60335-2-106:2025 – Safety for Heated Carpets and Floor-Installed Heating Units

Household and Similar Electrical Appliances – Safety – Part 2-106: Particular Requirements for Heated Carpets and for Heating Units for Room Heating Installed Under Removable Floor Coverings

This second edition, aligned with IEC 60335-2-106:2021, revises the safety requirements for heated carpets and heating units placed under removable floor coverings, specifying design, construction, and operational standards up to 250 V (single phase) or 480 V (other). The revision includes requirements for portable and washable heated carpets, direct installation procedures, and extensive testing for access to live parts, thermal safety, leakage current, and mechanical robustness.

It is intended for manufacturers and certifying agents in the electrical appliance industry, as well as regulatory authorities focused on domestic product safety. The standard’s requirements reflect technological advances in portable heating solutions and a growing market for flexible underfloor heating systems.

Notable is the standard’s alignment with earlier updates to IEC 60335-1, and enhancements in marking, instruction, and construction safety—especially for wearable and washable products.

Key highlights:

• New requirements for portable and washable heated carpets
• Enhanced testing: thermal hazards, leakage current, and mechanical integrity
• Expanded construction and marking specifications for user safety

Access the full standard:View EN IEC 60335-2-106:2025 on iTeh Standards

Common Themes and Industry Trends

Across these May 2025 publications, several cross-cutting themes emerged:

• Energy Efficiency and Environmental Focus: New and revised standards consistently embed strict energy efficiency metrics and emissions ceilings, closely tied to recent EU regulations. Sustainability is no longer peripheral—it’s deeply woven into structural and test requirements, marking a clear prioritization by both CEN and CLC.
• Conformity Assessment and Factory Control: Robust processes such as AVCP and FPC have become non-negotiables for product entry, reinforcing the value of transparent, repeatable production and performance verification.
• Safety for Modern Domestic Environments: Marked advances were made in product safety for both traditional combustion products and emergent electrical appliances, reflecting changes in the ways European households use and integrate heating and comfort technologies.
• Alignment and Harmonization: References to EU Directives, energy labelling, and common terminology indicate a sector-wide move toward harmonization, protecting both end-users and market competition.
• Sectoral Scope Expansion: Solid and liquid fuel appliance standards reflect innovation in hybrid and modular systems, modular assembly, and multipurpose design, while electrical safety standards encompass a new generation of portable, flexible heating solutions.

Compliance and Implementation Considerations

For organizations affected by these standards, several steps are recommended:

1. Evaluate Product Portfolios: Manufacturers and importers should assess existing and planned products against the latest efficiency, emissions, and safety requirements to identify gaps or recertification needs.
2. Prioritize AVCP and Factory Production Control: Early implementation or updating of assessment and verification programs is essential to maintain market access—especially under AVCP 3+ protocols.
3. Prepare for Labelling and Documentation: Ensure all products include clear instructions, labelling (including energy and emissions classifications), and traceability documentation to support regulatory inspections.
4. Engage with Certification Bodies Early: New and revised test methods may require prequalification runs and investments in updated test equipment or procedures.
5. Monitor Regulatory Timelines: Many standards specify grace periods or deadlines for withdrawal of conflicting national standards. Begin the transition process now, with close attention to compliance dates.
6. Utilize Authoritative Resources: Access full standards through trusted providers such as iTeh Standards for detailed requirements and implementation guidance.

Conclusion: Key Takeaways from May 2025

The five standards published in May 2025 collectively mark a step change for the Domestic and Commercial Equipment, Entertainment, and Sports sector, with far-reaching impacts for residential heating, building safety, and household comfort. Energy efficiency, sustainability, conformity assessment, and user protection have all been significantly strengthened.

Industry professionals should:

• Review and align products and processes with updated requirements
• Prioritize robust testing, FPC, and AVCP as part of their ongoing compliance strategy
• Leverage published documentation for best practices in safety, sustainability, and lifecycle management
• Stay actively engaged with sectoral updates via resources like iTeh Standards to remain competitive and compliant

Staying current with these evolving standards is essential—not only for regulatory conformance but for leadership in quality, sustainability, and user safety. Explore each document in depth to remain at the forefront of innovation and compliance in this dynamic field.