kSIST FprEN 12975:2021
(Main)Solar collectors - General requirements
Solar collectors - General requirements
This document is applicable to all types of fluid heating solar collectors. This European Standard specifies performance requirements for fluid heating solar collectors with respect to durability, reliability, safety and thermal performance. This European Standard includes provisions for the assessment and verification of constancy of performance to these requirements.
This document deals with the collector module and not with assemblies. This document is not applicable to those devices in which a thermal storage unit is an integral part to such an extent that the collection process cannot be separated from the storage process for making the collector thermal performance measurements.
Kollektoren - Allgemeine Anforderungen
Dieses Dokument ist für alle Arten von fluiderhitzenden Sonnenkollektoren anwendbar. Diese Europäische Norm legt die Anforderungen an die Leistungsfähigkeit von fluiderhitzenden Sonnenkollektoren hinsichtlich Dauerhaftigkeit, Zuverlässigkeit, Sicherheit und thermischer Leistungsfähigkeit fest. Diese Europäische Norm enthält Vorgaben für die Bewertung und Überprüfung der Leistungsbeständigkeit.
Dieses Dokument behandelt das Kollektormodul und nicht die Baugruppen. Dieses Dokument ist nicht auf solche Geräte anwendbar, bei denen der Wärmespeicher in einem solchen Maß integriert ist, dass bei der Messung der thermischen Leistungsfähigkeit am Kollektor der Wärmeerzeugungsprozess nicht vom Prozess der Wärmespeicherung getrennt werden kann.
Capteurs solaires - Exigences générales
Le présent document s'applique à tous les types de capteurs solaires à circulation de fluide. Le présent document spécifie les exigences de performance pour les capteurs solaires à circulation de fluide en ce qui concerne la durabilité, la fiabilité, la sécurité et la performance thermique.
Le présent document traite du capteur solaire et non de l’assemblage. Le présent document ne s'applique pas aux appareils dans lesquels un dispositif de stockage thermique fait partie intégrante dans la mesure où les opérations de captage et de stockage de l'énergie ne peuvent pas être séparées en vue d'effectuer des mesures de performance thermique du capteur.
Sprejemniki sončne energije - Splošne zahteve
General Information
RELATIONS
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN 12975:2018
01-november-2018
6SUHMHPQLNLVRQþQHHQHUJLMH6SORãQH]DKWHYH
Solar collectors - General requirements
Kollektoren - Allgemeine Anforderungen
Capteurs solaires - Exigences générales
Ta slovenski standard je istoveten z: prEN 12975
ICS:
27.160 6RQþQDHQHUJLMD Solar energy engineering
oSIST prEN 12975:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN 12975:2018
---------------------- Page: 2 ----------------------
oSIST prEN 12975:2018
DRAFT
EUROPEAN STANDARD
prEN 12975
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2018
ICS 27.160 Will supersede EN 12975-1:2006+A1:2010
English Version
Solar collectors - General requirements
Capteurs solaires - Exigences générales Kollektoren - Allgemeine Anforderungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 312.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12975:2018 E
worldwide for CEN national Members.---------------------- Page: 3 ----------------------
oSIST prEN 12975:2018
prEN 12975:2018 (E)
Contents Page
European foreword ....................................................................................................................................................... 5
1 Scope .................................................................................................................................................................... 6
2 Normative references .................................................................................................................................... 6
3 Terms and definitions ................................................................................................................................... 6
4 Symbols and abbreviations ......................................................................................................................... 7
5 Requirements ................................................................................................................................................... 7
5.1 General ................................................................................................................................................................ 7
5.2 Safety ................................................................................................................................................................... 7
5.3 Required tests .................................................................................................................................................. 7
5.4 Additional tests for the purpose of the Z-annexes .............................................................................. 7
5.4.1 Fire safety ........................................................................................................................................................... 7
5.4.2 Release of dangerous substances .............................................................................................................. 7
5.4.3 Surface temperature ...................................................................................................................................... 7
5.4.4 Electrical safety ................................................................................................................................................ 8
5.4.5 Sound level ........................................................................................................................................................ 8
5.5 Classification of collectors with respect to their hydraulic system .............................................. 8
5.6 Classification of collectors with respect to their intended place of installation ...................... 9
6 Assessment and verification of constancy of performance - AVCP ............................................ 10
6.1 General ............................................................................................................................................................. 10
6.2 Type testing .................................................................................................................................................... 11
6.2.1 General ............................................................................................................................................................. 11
6.2.2 Test samples, testing and compliance criteria .................................................................................. 11
6.2.3 Test reports .................................................................................................................................................... 12
6.2.4 Shared other party results ........................................................................................................................ 12
6.2.5 Cascading determination of the product type results .................................................................... 13
6.3 Factory production control (FPC) .......................................................................................................... 14
6.3.1 General ............................................................................................................................................................. 14
6.3.2 Requirements ................................................................................................................................................ 14
6.3.3 Product specific requirements ................................................................................................................ 16
6.3.4 Procedure for modifications .................................................................................................................... 17
6.3.5 One-off products, pre-production products and products produced in very low
quantity ............................................................................................................................................................ 17
7 Marking, labelling and packaging .......................................................................................................... 18
7.1 Drawings and data sheet ........................................................................................................................... 18
7.2 Marking, labelling and packaging .......................................................................................................... 18
7.3 Installer instruction manual .................................................................................................................... 19
Annex A (informative) Keys for using test results of test standards EN ISO 9806:2013 and
EN 12975-2:2006 .......................................................................................................................................... 21
A.1 Conversion of test results for the purpose of the Declarations of performance
(DoP's) as required in the Z-annexes .................................................................................................... 21
A.1.1 General ............................................................................................................................................................. 21
A.1.2 Mechanical resistance to climate loads ................................................................................................ 21
A.1.3 Weather tightness ........................................................................................................................................ 21
---------------------- Page: 4 ----------------------oSIST prEN 12975:2018
prEN 12975:2018 (E)
A.1.4 Collector reference area A ................................................................................................................... 21
SolA.1.5 Collector efficiency η ............................................................................................................................. 21
ColA.1.6 Collector zero loss efficiency η .............................................................................................................. 21
A.1.7 Collector first order coefficient a ......................................................................................................... 22
A.1.8 Collector second order coefficient a .................................................................................................... 22
A.1.9 Collector incidence angle modifier IAM ................................................................................................ 22
A.1.10 Thermal Output ............................................................................................................................................. 22
A.1.11 Thermal storage capacity .......................................................................................................................... 22
A.1.12 Maximum allowable pressure PS ............................................................................................................ 23
A.1.13 Maximum allowable temperature TS .................................................................................................... 23
A.1.14 Nominal size DN ............................................................................................................................................ 23
A.1.15 Volume V .......................................................................................................................................................... 23
A.1.16 Fluids ................................................................................................................................................................. 23
A.2 Reference table for EN ISO 9806:2013 and EN 12975-2:2006 ..................................................... 23
A.3 Thermal parameters for collectors tested under EN ISO 9806:2013 ........................................ 24
A.3.1 General ............................................................................................................................................................. 24
A.3.2 Collector efficiency η ............................................................................................................................. 24
ColA.3.3 Collector zero loss efficiency η .............................................................................................................. 24
A.3.4 Collector first order coefficient a ......................................................................................................... 25
A.3.5 Collector second order coefficient a .................................................................................................... 25
A.3.6 Collector incidence angle modifier IAM ................................................................................................ 25
A.4 Thermal parameters for collectors tested under EN 12975-2:2006 ......................................... 25
A.4.1 General ............................................................................................................................................................. 25
A.4.2 Collector efficiency η ............................................................................................................................. 25
ColA.4.3 Collector zero loss efficiency η .............................................................................................................. 26
A.4.4 Collector first order coefficient a ......................................................................................................... 26
A.4.5 Collector second order coefficient a .................................................................................................... 26
A.4.6 Collector incidence angle modifier IAM ................................................................................................ 27
Annex B (informative) Collector families .......................................................................................................... 28
B.1 Collector families .......................................................................................................................................... 28
B.1.1 General ............................................................................................................................................................. 28
B.1.2 General family concept ............................................................................................................................... 28
B.1.3 Size families .................................................................................................................................................... 28
B.1.4 Collector glass thickness families ........................................................................................................... 28
---------------------- Page: 5 ----------------------oSIST prEN 12975:2018
prEN 12975:2018 (E)
B.1.5 Collector families with different hydraulic schemes ...................................................................... 29
B.2 Design tolerances ......................................................................................................................................... 29
B.2.1 General ............................................................................................................................................................. 29
B.2.2 Coloured frames ........................................................................................................................................... 29
B.2.3 Riser distances .............................................................................................................................................. 29
B.2.4 Riser diameters ............................................................................................................................................. 29
B.3 Collector retesting guideline .................................................................................................................... 29
Annex C (normative) Reaction to fire testing: Selection, preparation, mounting and fixing of
test specimen for rating collectors in accordance with EN 13501-1 ......................................... 31
C.1 General ............................................................................................................................................................. 31
C.2 EN 13823 (Single burning item test) ..................................................................................................... 31
C.3 EN ISO 11925-2 (Single flame source test).......................................................................................... 31
C.4 Field of direct application ......................................................................................................................... 32
Annex D (normative) External fire exposure to roofs test: Selection, preparation, mounting
and fixing of test specimen for testing collectors in accordance with EN 13501-5 .............. 33
D.1 General ............................................................................................................................................................. 33
D.2 Field of direct application ......................................................................................................................... 33
Annex ZA (informative) Relationship of this European Standard with the Construction
Product Regulation CPR, (EU) No.305/2011 ...................................................................................... 34
ZA.1 Scope and relevant characteristics ........................................................................................................ 34
ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) ...................... 35
ZA.3 Assignment of AVCP tasks ......................................................................................................................... 35
Annex ZB (informative) Relationship between this European Standard and the energy
labelling requirements of Commission Delegated Regulation (EC) No 811/2013aimed to be covered .................................................................................................................................... 37
Annex ZC (informative) Relationship between this European Standard and the energy
labelling requirements of Commission Delegated Regulation (EC) No 812/2013aimed to be covered .................................................................................................................................... 38
Annex ZD (informative) Relationship between this European Standard and the Ecodesign
requirements of Commission Regulation (EC) No 814/2013 aimed to be covered ............. 39
Annex ZE (informative) Relationship between this European Standard and the essential
safety requirements (ESR) of Directive 2014/68/EU of the European parliament andof the council (Pressure equipment Directive PED) aimed to be covered .............................. 40
Annex ZF (informative) Relationship between this European Standard and the essential
health and safety requirements of Directive 2006/42/EC of the EuropeanParliament and of the Council of 17 May 2006 on machinery (Machinery Directive
MD) aimed to be covered ........................................................................................................................... 41
Annex ZG (informative) Relationship between this European Standard and the essential
requirements of Directive (LVD) 2014/35/EU (Low Voltage Directive LVD) aimed tobe covered ....................................................................................................................................................... 42
Bibliography ................................................................................................................................................................. 43
---------------------- Page: 6 ----------------------oSIST prEN 12975:2018
prEN 12975:2018 (E)
European foreword
This document (prEN 12975:2018) has been prepared by Technical Committee CEN/TC 312 “Thermal
solar systems and components”, the secretariat of which is held by ELOT.This document is currently submitted to the CEN Enquiry.
This document will supersede EN 12975-1:2006+A1:2010.
This document has been prepared under mandates given to CEN by the European Commission and the
European Free Trade Association, and supports the essential requirements related with solar collectors
of the Regulation (EU) No 305/2011 of the European Parliament and of the council of 9 March 2011
(Construction Products Regulation, CPR), of the Commission Delegated Regulations (EU) No 811/2013
and (EU) No 812/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European
Parliament and of the Council of 19 May 2010 (Energy Labelling Directive), of the Commission
Regulations (EU) No 814/2013 of 2 August 2013 implementing Directive 2009/125/EC of 21 October
2009 (Ecodesign Directive), and under the general mandate of the Directive 2014/68/EU of the
European Parliament and of the council of 15 May 2014 (Pressure Equipment Directive, PED), and
under the general mandate for the Low Voltage Directive (LVD) 2014/35/EU, and under the general
mandates for the Machinery Directive, Directive 2006/42/EC of the European Parliament and of the
Council of 17 May 2006.For relationship with these EU Directives and Regulations, see informative Annexes ZA to ZG, which are
integral parts of this document.---------------------- Page: 7 ----------------------
oSIST prEN 12975:2018
prEN 12975:2018 (E)
1 Scope
This document is applicable to all types of fluid heating solar collectors. This European Standard
specifies performance requirements for fluid heating solar collectors with respect to durability,
reliability, safety and thermal performance. This European Standard includes provisions for the
assessment and verification of constancy of performance to these requirements.This document deals with the collector module and not with assemblies. This document is not
applicable to those devices in which a thermal storage unit is an integral part to such an extent that the
collection process cannot be separated from the storage process for making the collector thermal
performance measurements.2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 13501-1, Fire classification of construction products and building elements — Part 1: Classification
using test data from reaction to fire testsEN 13501-5, Fire classification of construction products and building elements — Part 5: Classification
using data from external fire exposure to roofs testsEN 13823, Reaction to fire tests for building products — Building products excluding floorings exposed to
the thermal attack by a single burning itemEN ISO 3743-2, Acoustics — Determination of sound power levels of noise sources using sound pressure —
Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special
reverberation test rooms (ISO 3743-2)EN ISO 3747, Acoustics — Determination of sound power levels and sound energy levels of noise sources
using sound pressure — Engineering/survey methods for use in situ in a reverberant environment (ISO
3747)EN ISO 9488, Solar energy — Vocabulary (ISO 9488)
EN ISO 9806:2017, Solar energy — Solar thermal collectors — Test methods (ISO 9806:2017)
EN ISO 11925-2, Reaction to fire tests — Ignitability of products subjected to direct impingement of flame
— Part 2: Single-flame source test (ISO 11925-2)ISO 3741, Acoustics — Determination of sound power levels and sound energy levels of noise sources using
sound pressure — Precision methods for reverberation test rooms3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN ISO 9488 and
EN ISO 9806:2017 apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http://www.electropedia.org/— ISO Online browsing platform: available at http://www.iso.org/obp
---------------------- Page: 8 ----------------------
oSIST prEN 12975:2018
prEN 12975:2018 (E)
4 Symbols and abbreviations
For the purposes of this European Standard, the symbols, abbreviations and units given in EN ISO 9488
and EN ISO 9806:2017 apply.5 Requirements
5.1 General
Collectors shall be tested according to 5.3. For the declarations of performance of a solar collector as
required in the Z-Annexes, additional tests (5.4) or conversions of test results into other formats may be
required (A.1).5.2 Safety
Materials to be used in the collector and in the installation incorporating collectors shall be chosen
taking into account the expected maximum local temperatures with respect to e.g. melting, burning,
self-ignition, or any other kind of degradation.5.3 Required tests
Collectors shall be tested according to Table 1 of EN ISO 9806:2017 considering the provision of
Clause 5 of EN ISO 9806:2017. The measurement of the pressure drop (Clause 27 of EN ISO 9806:2017)
is recommended but not mandatory. The results shall be reported as required in the corresponding
clauses and in Annex A of EN ISO 9806:2017.None of the findings of the performed tests shall be rated as “major failure” according to Clause 17 of
EN ISO 9806:2017.5.4 Additional tests for the purpose of the Z-annexes
5.4.1 Fire safety
Reaction to fire: If required, collectors that are not classified without testing shall be tested according to
EN 13501-1 applying the standards therein as applicable and following Annex C for the selection,
preparation, mounting, fixing as well as Annex ZA for the field of application of the collector.
External fire performance: If required, collectors embedded in the roof shall be tested and classified in
accordance with EN 13501-5 applying the standards therein, as applicable and Annex D for the
selection, preparation mounting and fixing and field of application of the collector.
5.4.2 Release of dangerous substancesNational regulations on dangerous substances may require verification and declaration on release, and
sometimes content, when construction products covered by this European Standard are placed on those
markets. In the absence of European harmonized test methods, verification and declaration on
release/content should be done taking into account national provisions in the place of use.
NOTE An informative database covering European and national provisions on dangerous substances is
available at https://ec.europa.eu/growth/tools-databases/cp-ds_en5.4.3 Surface temperature
Harmful surface temperatures on a solar thermal collector are linked to a malfunction of the collector
that are rated as major failure according to Clause 17 of EN ISO 9806:2017. The surface temperatures of
parts that are associated with the transmission of heat are excluded. No findings with a rating as
“2 - major failure” according to Clause 17 of EN ISO 9806:2017 thus confirms that no harmful
temperatures on the surface of the collector are expected.---------------------- Page: 9 ----------------------
oSIST prEN 12975:2018
prEN 12975:2018 (E)
5.4.4 Electrical safety
If required, collectors co-generating or using electricity shall comply with the specific requirements of
the applicable standards and regulations for such products (See also Annex ZG).5.4.5 Sound level
If applicable, the sound level shall be tested and the results shall be reported according to either
ISO 3741, EN ISO 3743-2 or EN ISO 37475.5 Classification of collectors with respect to their hydraulic system
Collectors shall be classified with respect to their intended use and their intended fluids (Group 1 or
Group 2 fluids) into one or several collector classes defined in Table 1 — Collector classes with respect
to the hydraulic system.Table 1 — Collector classes with respect to the hydraulic system
Collector class Definition
Class 0 Low pressure collectors (PS < 0,5 bar over atmosphere) and all collectors
that are not classified in another class listed in this table including aircollectors.
Class A1(F1) Collectors made of one pipe which are not intended for generation of steam
or super-heated water in the primary circuit using Group 1 fluids andDN ≤ 25 mm
Class Ax1(F1) Collectors made of one pipe which are not intended for generation of steam
or super-heated water in the primary circuit using Group 1 fluids andDN > 25 mm
Class A1(F2) Collectors made of one pipe which are not intended for generation of steam
or super-heated water in the primary circuit using Group 2 fluids andDN ≤ 32 mm
Class Ax1(F2) Collectors made of one pipe which are not intended for generation of steam
or super-heated water in the primary circuit using Group 2 fluids andDN > 32 mm
Class A2(F1) Collectors made of several pipes which are not intended for generation of
steam or super-heated water in the primary circuit using Group 1 fluids andPS·V ≤ 25 bar·litres
Class Ax2(F1) Collectors made of several pipes which are not intended for generation of
steam or super-heated water in the primary circuit using Group 1 fluids andPS·V > 25 bar·litres
Class A2(F2) Collectors made of several pipes which are not intended for generation of
steam or super-heated water in the primary circuit using Group 2 fluids andPS·V ≤ 50 bar·litres
Class Ax2(F2) Collectors made of several pipes (e.g. harp) which are not intended for
generation of steam or super-h...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.