prEN 17628
(Main)Fugitive and diffuse emissions of common concern to industry sectors - Standard method to determine diffuse emissions of volatile organic compounds into the atmosphere
Fugitive and diffuse emissions of common concern to industry sectors - Standard method to determine diffuse emissions of volatile organic compounds into the atmosphere
This document specifies the framework for determining emissions to the atmosphere of Volatile Organic Compounds (VOCs). It defines a system of methods to detect and/or identify and/or quantify VOC emissions from industrial sources. These methods include Optical Gas Imaging (OGI), Differential Absorption Lidar (DIAL), Solar Occultation Flux (SOF), Tracer Correlation (TC), and Reverse Dispersion Modelling (RDM). It specifies the methodologies for carrying out all the above, and also defines the performance requirements and capabilities of the direct monitoring methods, the requirements for the results and their measurement uncertainties.
This document specifically addresses, but is not restricted to, the petrochemicals, oil refining, and chemical industries receiving, processing, storing, and/or exporting of VOCs, and includes the emissions of VOCs from the natural gas processing/conditioning industry and the storage of natural gas and similar fuels.
This document addresses diffuse VOC emissions to atmosphere but excludes the emissions of VOCs into water and into solid materials such as soils. It is complementary to EN 15446 [9], which covers detection, localization of sources (individual leaks from equipment and piping), and quantification of fugitive VOC emissions within the scope of a Leak Detection and Repair Programme (LDAR).
This document has been validated for non-methane VOCs, but the methodologies are in principle applicable to methane and other gases.
This document defines methods to determine (detect, identify and/or quantify) VOC emissions during the periods of monitoring. It does not address the extrapolation of emissions to time periods beyond the monitoring period.
Fugitive und diffuse Emissionen von allgemeinem Interesse für Industriebereiche - Verfahren zur Bestimmung diffuser Emissionen von flüchtigen organischen Verbindungen in die Atmosphäre
Dieses Dokument legt einen Rahmen zur Bestimmung von Emissionen flüchtiger organischer Verbindungen (VOC) in die Atmosphäre fest. Es definiert ein System von Verfahren zur Erkennung und/oder Identifizierung und/oder Quantifizierung von VOC Emissionen aus industriellen Quellen. Diese Verfahren umfassen die optische Gasdetektion (en: Optical Gas Imaging (OGI)), Differential Absorption Lidar (DIAL), Solar Occultation Flux (SOF), Tracer Korrelation (en: Tracer Correlation (TC)) und inverse Ausbreitungs¬rechnung (en: Reverse Dispersion Modelling (RDM)). Das Dokument legt die Methodik für die Ausführung der genannten Verfahren fest und definiert darüber hinaus die Leistungsanforderungen und Möglichkeiten dieser direkten Messverfahren sowie die Anforderungen an die Ergebnisse und ihre Messunsicherheiten.
Dieses Dokument richtet sich vor allem an die petrochemische, ölverarbeitende und chemische Industrie, die VOC transportieren, verarbeiten, lagern und/oder exportieren und zielt auch auf VOC Emissionen aus der Erdgas verarbeitenden/aufbereitenden Industrie und die Lagerung von Erdgas und ähnlichen Brennstoffen.
Dieses Dokument gilt für diffuse VOC Emissionen in die Atmosphäre, schließt jedoch VOC Emissionen in Wasser und feste Materialien wie Böden aus. Es ergänzt EN 15446 [9], das die Erkennung, Lokalisierung von Quellen (einzelne Leckagen aus Anlagen und Rohrleitungen) und die Quantifizierung fugitiver VOC Emissionen innerhalb des Anwendungsbereichs des Programms für Leckerkennung und reparatur (en: leak detection and repair, LDAR) abdeckt.
Dieses Dokument wurde für Nichtmethan VOC validiert, die Methodik ist jedoch grundsätzlich auf Methan und andere Gase anwendbar.
Dieses Dokument legt Verfahren zur Bestimmung (Erkennung, Identifizierung und/oder Quantifizierung) von VOC Emissionen während der Überwachungszeiträume fest. Es behandelt nicht die Extrapolation von Emissionen auf Zeiträume über die Überwachungszeiträume hinaus.
Émissions fugitives et diffuses concernant les secteurs industriels - Méthode normalisée pour la détermination des émissions diffuses de composés organiques volatils dans l'atmosphère
Le présent document spécifie le cadre pour la détermination des émissions dans l'atmosphère de composés organiques volatils (COV). Il définit un système de méthodes pour détecter et/ou identifier et/ou quantifier les émissions de COV provenant de sources industrielles. Ces méthodes comprennent l'imagerie optique de gaz (OGI), le lidar à absorption différentielle (DIAL), l'occultation solaire par le flux (SOF), le traçage gazeux (TC) et la modélisation inverse de la dispersion (RDM). Il précise les méthodologies permettant de mettre en oeuvre tous les éléments ci-dessus, et définit également les exigences de performance et les capacités des méthodes de surveillance directe, les exigences relatives aux résultats et leurs incertitudes de mesure.
Le présent document traite plus particulièrement, mais sans s'y limiter, de la pétrochimie, du raffinage du pétrole et des industries chimiques qui reçoivent, traitent, stockent et/ou exportent des COV, et inclut les émissions de COV provenant de l'industrie de traitement et de conditionnement du gaz naturel et du stockage du gaz naturel et de combustibles similaires.
Le présent document traite des émissions diffuses de COV dans l'atmosphère, mais exclut les émissions de COV dans l'eau et dans les matériaux solides tels que les sols. Il complète l'EN 15446 [9], qui couvre la détection, la localisation des sources (fuites individuelles d'équipements et de tuyauteries), et la quantification des émissions fugitives de COV dans le cadre d'un programme de détection et de réparation des fuites (LDAR).
Le présent document a été validé pour les COV non méthaniques, mais les méthodologies sont en principe applicables au méthane et à d'autres gaz.
Le présent document définit les méthodes permettant de déterminer (détecter, identifier et/ou quantifier) les émissions de COV pendant les périodes de surveillance. Il ne traite pas de l'extrapolation des émissions sur des périodes postérieures à la période de surveillance.
Ubežne in razpršene emisije skupnega pomena za industrijske sektorje - Standardna metoda za določevanje razpršenih emisij hlapnih organskih spojin v ozračje
General Information
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN 17628:2020
01-december-2020
Ubežne in razpršene emisije skupnega pomena za industrijske sektorje -
Standardna metoda za določevanje razpršenih emisij hlapnih organskih spojin v
ozračje
Fugitive and diffuse emissions of common concern to industry sectors - Standard
method to determine diffuse emissions of volatile organic compounds into the
atmosphere
Ta slovenski standard je istoveten z: prEN 17628
ICS:
13.040.40 Emisije nepremičnih virov Stationary source emissions
oSIST prEN 17628:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN 17628:2020
---------------------- Page: 2 ----------------------
oSIST prEN 17628:2020
DRAFT
EUROPEAN STANDARD
prEN 17628
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2020
ICS 13.040.40
English Version
Fugitive and diffuse emissions of common concern to
industry sectors - Standard method to determine diffuse
emissions of volatile organic compounds into the
atmosphere
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 264.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17628:2020 E
worldwide for CEN national Members.---------------------- Page: 3 ----------------------
oSIST prEN 17628:2020
prEN 17628:2020 (E)
Contents Page
European foreword ....................................................................................................................................................... 7
Introduction .................................................................................................................................................................... 8
1 Scope .................................................................................................................................................................... 9
2 Normative references .................................................................................................................................... 9
3 Terms and definitions ................................................................................................................................... 9
4 Symbols and abbreviations ...................................................................................................................... 11
5 Principle .......................................................................................................................................................... 11
6 Measurement objectives ............................................................................................................................ 12
6.1 General ............................................................................................................................................................. 12
6.2 Quantification of site emissions .............................................................................................................. 13
6.3 Quantification of section emissions ...................................................................................................... 13
6.4 Quantification of main equipment emissions .................................................................................... 14
6.5 Localization emission sources/leaks .................................................................................................... 14
7 Data quality objectives ............................................................................................................................... 14
7.1 General ............................................................................................................................................................. 14
7.2 Quantification of site emissions .............................................................................................................. 14
7.3 Quantification of section emissions ...................................................................................................... 15
7.4 Quantification of main equipment emissions .................................................................................... 15
7.5 Detection/localization of emission sources ....................................................................................... 15
8 Overview of methods .................................................................................................................................. 15
8.1 Applicability and limitations of monitoring techniques ................................................................ 15
8.1.1 Applicability ................................................................................................................................................... 15
8.1.2 Limitations ...................................................................................................................................................... 16
8.2 Specific methods ........................................................................................................................................... 17
8.2.1 General ............................................................................................................................................................. 17
8.2.2 Differential Absorption Lidar (DIAL) .................................................................................................... 18
8.2.3 Solar Occultation Flux (SOF) .................................................................................................................... 19
8.2.4 Tracer Correlation (TC) ............................................................................................................................. 21
8.2.5 Optical Gas Imaging (OGI) ......................................................................................................................... 23
8.2.6 Reverse Dispersion Modelling (RDM) .................................................................................................. 24
9 Meteorology data and measurements .................................................................................................. 26
10 Measurement strategy and measurement campaign planning ................................................... 27
10.1 General ............................................................................................................................................................. 27
10.2 Measurement objectives ............................................................................................................................ 28
10.3 Measurement planning .............................................................................................................................. 29
10.3.1 Specification of measurement plan ....................................................................................................... 29
10.3.2 Surveyed areas and equipment .............................................................................................................. 29
10.3.3 Technical supervisor and personnel ..................................................................................................... 29
10.3.4 Planning of the measurement dates ...................................................................................................... 29
10.3.5 Planning of combined measurements .................................................................................................. 30
10.4 Preparation of the measurement campaign ....................................................................................... 30
10.4.1 Preparations by the plant operator ....................................................................................................... 30
10.4.2 Preparations by the measurement provider ..................................................................................... 30
---------------------- Page: 4 ----------------------oSIST prEN 17628:2020
prEN 17628:2020 (E)
10.4.3 Preparations after arrival at the plant .................................................................................................. 31
10.5 Conducting the measurements ................................................................................................................ 31
10.6 Calculation of results and measurement uncertainty ..................................................................... 31
10.6.1 Calculation of results ................................................................................................................................... 31
10.6.2 Assessment of measurement uncertainty ........................................................................................... 31
10.7 Meteorology .................................................................................................................................................... 36
11 Reporting ......................................................................................................................................................... 36
12 Results of the validation and demonstration field studies ............................................................ 37
12.1 General ............................................................................................................................................................. 37
12.2 First campaign: validation study ............................................................................................................. 37
12.3 Second campaign: demonstration of the applicability of the methods ..................................... 38
Annex A (normative) DIAL procedure ................................................................................................................ 40
A.1 Performance requirements ...................................................................................................................... 40
A.2 Application of the method ......................................................................................................................... 41
A.2.1 Before campaign ........................................................................................................................................... 41
A.2.2 Set-up and initial tasks ............................................................................................................................... 42
A.2.3 Daily tasks ....................................................................................................................................................... 43
A.2.4 Measurement strategy ................................................................................................................................ 44
A.3 Quality control ............................................................................................................................................... 46
A.3.1 General ............................................................................................................................................................. 46
A.3.2 Spectroscopic calibration procedures .................................................................................................. 46
A.3.2.1 General ............................................................................................................................................................. 46
A.3.2.2 Calibration gases ........................................................................................................................................... 46
A.3.2.3 Calibration cell ............................................................................................................................................... 47
A.3.2.4 Spectral scans ................................................................................................................................................. 47
A.3.2.5 Continuous spectral monitoring ............................................................................................................. 47
A.3.2.6 Check of system performance .................................................................................................................. 47
A.3.3 Meteorological sensors calibration........................................................................................................ 47
A.4 Data analysis .................................................................................................................................................. 47
A.4.1 General ............................................................................................................................................................. 47
A.4.2 Background subtraction ............................................................................................................................ 47
A.4.3 Normalization for variation in transmitted energy ......................................................................... 48
A.4.4 Calculation of path-integrated concentration .................................................................................... 48
A.4.5 Derivation of range-resolved concentrations .................................................................................... 48
A.4.6 Calculation of emission rates ................................................................................................................... 48
A.5 Reporting ......................................................................................................................................................... 49
Annex B (normative) SOF procedure .................................................................................................................. 50
B.1 Performance requirements ...................................................................................................................... 50
B.2 Application of the method ......................................................................................................................... 50
---------------------- Page: 5 ----------------------oSIST prEN 17628:2020
prEN 17628:2020 (E)
B.2.1 Before campaign ........................................................................................................................................... 50
B.2.2 Set-up and initial tasks ............................................................................................................................... 51
B.2.3 Daily tasks ....................................................................................................................................................... 52
B.2.4 Measurement strategy ............................................................................................................................... 52
B.3 Quality control .............................................................................................................................................. 54
B.3.1 General ............................................................................................................................................................. 54
B.3.2 Spectroscopic calibration procedures .................................................................................................. 54
B.3.2.1 General ............................................................................................................................................................. 54
B.3.2.2 Calibration ...................................................................................................................................................... 54
B.3.3 Meteorological sensors calibration ....................................................................................................... 54
B.3.4 Required QC checks in the field .............................................................................................................. 54
B.4 Data analysis .................................................................................................................................................. 55
B.4.1 General ............................................................................................................................................................. 55
B.4.2 Calculation of column values ................................................................................................................... 56
B.4.3 Calculation of emission rates ................................................................................................................... 56
B.4.4 Estimation and localization of emission sources.............................................................................. 57
B.4.5 Data validation procedures ...................................................................................................................... 58
B.5 Reporting ........................................................................................................................................................ 59
Annex C (normative) OGI procedure .................................................................................................................. 60
C.1 Application of the method ......................................................................................................................... 60
C.1.1 General ............................................................................................................................................................. 60
C.1.2 Set-up, initial tasks and detection planning ....................................................................................... 60
C.1.3 Performance of the survey ........................................................................................................................ 61
C.2 Quality control .............................................................................................................................................. 63
C.2.1 Test procedures ............................................................................................................................................ 63
C.2.1.1 General ............................................................................................................................................................. 63
C.2.1.2 Basic requirements ..................................................................................................................................... 63
C.2.1.3 Frequency ....................................................................................................................................................... 63
C.2.1.4 Operating mode ............................................................................................................................................ 63
C.3 Data analysis .................................................................................................................................................. 64
C.3.1 General ............................................................................................................................................................. 64
C.3.2 Database Management ............................................................................................................................... 64
C.3.3 Emission rate calculation and quantification .................................................................................... 64
C.4 Reporting ........................................................................................................................................................ 64
C.4.1 General ............................................................................................................................................................. 64
C.4.2 Customer requirements ............................................................................................................................. 64
---------------------- Page: 6 ----------------------oSIST prEN 17628:2020
prEN 17628:2020 (E)
Annex D (normative) TC procedure .................................................................................................................... 65
D.1 Performance requirements ...................................................................................................................... 65
D.2 Application of the method ......................................................................................................................... 65
D.2.1 Before campaign ........................................................................................................................................... 65
D.2.2 Set-up and initial tasks ............................................................................................................................... 66
D.2.3 Daily tasks ....................................................................................................................................................... 67
D.2.4 Measurement strategy ................................................................................................................................ 67
D.3 Quality control ............................................................................................................................................... 69
D.3.1 General ............................................................................................................................................................. 69
D.3.2 Calibration of gas sensors .......................................................................................................................... 69
D.3.3 Meteorological sensor calibration.......................................................................................................... 69
D.3.4 Tracer release equipment calibration .................................................................................................. 69
D.3.5 Required QC checks in the field ............................................................................................................... 69
D.4 Data analysis .................................................................................................................................................. 70
D.4.1 Calculation of emission rates ................................................................................................................... 70
D.4.2 Estimation and localization of emission sources .............................................................................. 70
D.4.3 Data validation procedures ...................................................................................................................... 70
D.5 Reporting ......................................................................................................................................................... 71
Annex E (normative) RDM procedure ................................................................................................................ 73
E.1 General ............................................................................................................................................................. 73
E.2 Performance requirements ...................................................................................................................... 73
E.3 Application of the method ......................................................................................................................... 74
E.3.1 Before campaign ........................................................................................................................................... 74
E.3.2 Set-up and initial tasks ............................................................................................................................... 75
E.3.3 Daily Tasks ...................................................................................................................................................... 75
E.3.4 Measurement strategy ................................................................................................................................ 76
E.4 Quality control ............................................................................................................................................... 78
E.4.1 General ............................................................................................................................................................. 78
E.4.2 Analyser calibration procedures ............................................................................................................ 78
E.4.2.1 General ............................................................................................................................................................. 78
E.4.2.2 Calibration gases ........................................................................................................................................... 78
E.4.2.3 Calibration bag .............................................................................................................................................. 78
E.4.2.4 Continuous monitoring............................................................................................................................... 78
E.4.2.5 Check of system performance .................................................................................................................. 78
E.4.3 Meteorological sensor calibration.......................................................................................................... 78
E.5 Data analysis .................................................................................................................................................. 79
---------------------- Page: 7 ----------------------oSIST prEN 17628:2020
prEN 17628:2020 (E)
E.5.1 General ............................................................................................................................................................. 79
E.5.2 Background subtraction ............................................................................................................................ 79
E.5.3 Concentration conversion according to speciation ......................................................................... 79
E.5.4 Calculation of emission rates ................................................................................................................... 79
Annex F (informative) Meteorology ................................................................................................................... 80
F.1 General ............................................................................................................................................................. 80
F.2 Principles of placement specific to the application on complex sites ....................................... 81
F.3 Height(s) .......................................................................................................................................................... 82
F.4 Instrumentation choices for wind speed and direction ................................................................. 83
F.5 Performance requirements for wind speed and direction ........................................................... 83
F.6 Lidar profiles ................................................................................................................................................. 84
F.7 Emission rate calculations ........................................................................................................................ 84
F.8 Averaging time suited to different measurement strategies ....................................................... 85
F.9 Spatial variation (physical separation of wind measurement and concentrationmeasurement) .......................................................................................
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.