BC-T-330 -
General Information
Release 1998 UIC aspects of GSM data services
- Standard213 pagesEnglish languagesale 10% offe-Library read for1 day
CR TSG#7
- Standard110 pagesEnglish languagesale 10% offe-Library read for1 day
CR SMG#31
- Standard216 pagesEnglish languagesale 10% offe-Library read for1 day
04.60 A205 4 R99 8.3.0 Enhanced Measurement Reporting B 8.4.0 04.60 A624 6 R99 8.3.0 MS RAC impacts on One Phase and Two Phase Access procedures B 8.4.0 04.60 A798 R998.3.0 Order of FBI/TI and E bits in RLC/MAC headersD 8.4.0 04.60 A799 1 R99 8.3.0 GPRS and EGPRS TBF modes for a single MS F 8.4.0 04.60 A800 R99 8.3.0 Clarification on the handling of BEP_PERIOD2 F 8.4.0 04.60 A801 R99 8.3.0 Clarification on bitmap compression in ACK/NACK IE F 8.4.0 04.60 A802 1 R99 8.3.0 CBCH configuration in PBCCH B 8.4.0 04.60 A805 1 R99 8.3.0 Correction to mapping of interference levels F 8.4.0 04.60A8071R998.3.0Clarification of power control requirements during TBF establishment F 8.4.0 04.60 A808 1 R99 8.3.0 Clarification on PSI2 for accessing a GPRS cell F 8.4.0 04.60 A810 R99 8.3.0 Error in CR introduction for PACKET DL ASSIGNMENT F 8.4.0 04.60 A811 1 R99 8.3.0 Inconsistency in PACKET TIMESLOT RECONFIGURE about window size F 8.4.0 04.60 A813 R99 8.3.0 Cell selection parameters in PSI3 for COMPACT B 8.4.0 04.60 A816 R99 8.3.0 Correction to MS behaviour upon T3168 expiry F 8.4.0 04.60 A817 R99 8.3.0 Addition of Index and Count Variables for PSI6 and PSI7 messagesF 8.4.0 04.60 A818 1 R99 8.3.0 Um Interface: Support for BSS Packet Flow Context Procedures B 8.4.0 04.60 A820 R99 8.3.0 Cell Bar Qualify 2 parameter messages F 8.4.0 04.60 A823 R99 8.3.0 Correction to MS behaviour at two phase packet accessF 8.4.0 04.60 A826 R99 8.3.0 Clarification of reason for CHANNEL REQUEST F 8.4.0 04.60 A827 R99 8.3.0 Classification of Packet Measurement Order message F 8.4.0 04.60 A828 R99 8.3.0 CSN.1 coding corrections of PSI3 and PSI3bisF 8.4.0 04.60 A831 1 R99 8.3.0 Addition of NC0 parameter for Packet Measurement Order messageB 8.4.0 04.60 A840 R998.3.0 Correction to timer T3174 value F 8.4.0 04.60 A841 1 R99 8.3.0 Corrections to neighbour cell parameters in PSI3bisF 8.4.0
- Standard243 pagesEnglish languagesale 10% offe-Library read for1 day
This specification defines the stage-2 service description for a General Packet Radio Service (GPRS) on GSM. In analogy with CCITT Recommendations I.130 [1] and with reference to CCITT Recommendations VI.1 Q.65 (Stage 2 of the method for the characterisation of services supported by an ISDN), the second stage of the following three-level structure is derived from a stage 1 service description. Stage 1 is an overall service description, from the service subscriber s and user s standpoints, that views the network as a single entity which provides services to the user. Stage 2 identifies the functional capabilities and information flows needed to support the service described in stage 1. Furthermore, it identifies various possible physical locations for the functional capabilities. The output of Stage 2, which is signalling system independent, is used as an input to Stage 3, the design of signalling system and switching Recommendations. Stage 3 defines the signalling system protocols and switching functions needed to implement the service described in stage 2.
- Standard107 pagesEnglish languagesale 10% offe-Library read for1 day
Release 1998 SMG#30bis
- Standard216 pagesEnglish languagesale 10% offe-Library read for1 day
CR SMG#31
- Standard215 pagesEnglish languagesale 10% offe-Library read for1 day
.
- Standard220 pagesEnglish languagesale 10% offe-Library read for1 day
This specification defines the stage-2 service description for a General Packet Radio Service (GPRS) on GSM. In analogy with CCITT Recommendations I.130 [1] and with reference to CCITT Recommendations VI.1 Q.65 (Stage 2 of the method for the characterisation of services supported by an ISDN), the second stage of the following three-level structure is derived from a stage 1 service description. Stage 1 is an overall service description, from the service subscriber s and user s standpoints, that views the network as a single entity which provides services to the user. Stage 2 identifies the functional capabilities and information flows needed to support the service described in stage 1. Furthermore, it identifies various possible physical locations for the functional capabilities. The output of Stage 2, which is signalling system independent, is used as an input to Stage 3, the design of signalling system and switching Recommendations. Stage 3 defines the signalling system protocols and switching functions needed to implement the service described in stage 2.
- Standard108 pagesEnglish languagesale 10% offe-Library read for1 day
This specification defines the stage-2 service description for a General Packet Radio Service (GPRS) on GSM. In analogy with CCITT Recommendations I.130 [1] and with reference to CCITT Recommendations VI.1 Q.65 (Stage 2 of the method for the characterisation of services supported by an ISDN), the second stage of the following three-level structure is derived from a stage 1 service description. Stage 1 is an overall service description, from the service subscriber s and user s standpoints, that views the network as a single entity which provides services to the user. Stage 2 identifies the functional capabilities and information flows needed to support the service described in stage 1. Furthermore, it identifies various possible physical locations for the functional capabilities. The output of Stage 2, which is signalling system independent, is used as an input to Stage 3, the design of signalling system and switching Recommendations. Stage 3 defines the signalling system protocols and switching functions needed to implement the service described in stage 2.
- Standard110 pagesEnglish languagesale 10% offe-Library read for1 day
CR TSG#7
- Standard117 pagesEnglish languagesale 10% offe-Library read for1 day
Added CR history that was forgotten after SMG#31
- Standard203 pagesEnglish languagesale 10% offe-Library read for1 day
.
- Standard219 pagesEnglish languagesale 10% offe-Library read for1 day
Release 1998 UIC aspects of GSM data services
- Standard117 pagesEnglish languagesale 10% offe-Library read for1 day
.
- Standard185 pagesEnglish languagesale 10% offe-Library read for1 day
Release 1998 UIC aspects of GSM data services
- Standard115 pagesEnglish languagesale 10% offe-Library read for1 day
Upgrade to release 1998 plus CRs at SMG#30, 30bis, 31
- Standard253 pagesEnglish languagesale 10% offe-Library read for1 day
SUBJECT Allowing re-negotiation of the QoS parameters for throughput during a session improves the flexibility of network operation and increases the quality of service perceived by the user. Requirement for the MS to inform the network of its GPRS class is not appropriate for the stage 1 and should be left for the stage 2 to determine. The three MS classes A, B, C remain unchanged. Clarification of the GPRS Attach characteristics. A GPRS-Attach shall be succesfully performed only if the subscriber has a valid GPRS subscription.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
Updated to version 6.7.0 CRs from CN#7
- Standard65 pagesEnglish languagesale 10% offe-Library read for1 day
SUBJECT GPRS Charging enhancements to GTP Introduction of the PDP-type PPP Introduction of the PDP type OSH:IHOSS GTP/GTP Protocol Type bit
- Standard67 pagesEnglish languagesale 10% offe-Library read for1 day
CRs from CN#8
- Standard64 pagesEnglish languagesale 10% offe-Library read for1 day
SUBJECT Allowing re-negotiation of the QoS parameters for throughput during a session improves the flexibility of network operation and increases the quality of service perceived by the user. Requirement for the MS to inform the network of its GPRS class is not appropriate for the stage 1 and should be left for the stage 2 to determine. The three MS classes A, B, C remain unchanged. Clarification of the GPRS Attach characteristics. A GPRS-Attach shall be succesfully performed only if the subscriber has a valid GPRS subscription. SA#05 SP-99440 SP-99479 A021 A023 6.3.0 Class B mode of operation GPRS Stage 1 removal of example
- Standard32 pagesEnglish languagesale 10% offe-Library read for1 day
Updated to version 7.4.0 CRs from CN#7
- Standard67 pagesEnglish languagesale 10% offe-Library read for1 day
CRs TSG#5, #6
- Standard65 pagesEnglish languagesale 10% offe-Library read for1 day
CRs from CN#8
- Standard67 pagesEnglish languagesale 10% offe-Library read for1 day
SUBJECT Allowing re-negotiation of the QoS parameters for throughput during a session improves the flexibility of network operation and increases the quality of service perceived by the user. Requirement for the MS to inform the network of its GPRS class is not appropriate for the stage 1 and should be left for the stage 2 to determine. The three MS classes A, B, C remain unchanged. Clarification of the GPRS Attach characteristics. A GPRS-Attach shall be succesfully performed only if the subscriber has a valid GPRS subscription.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
This GSM Technical Specification defines the Gn and Gp interfaces for the General Packet Radio Service (GPRS). SUBJECT GGSN Recovery Addition of the suspend cause to reject a network requested context activation Provision of resilience upon GGSN failure Data forwarding in inter SGSN routing area update Decoupling of GTP from network service Clarifications and corrections for 09.60
- Standard66 pagesEnglish languagesale 10% offe-Library read for1 day
CRs TSG#5, #6
- Standard68 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TSGN-040960Q6R3
- Standard64 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TSGN-040960Q7R3
- Standard67 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TSGS-010260Q6R2
- Standard32 pagesEnglish languagesale 10% offe-Library read for1 day
REN/SMG-030960Q7R2
- Standard67 pagesEnglish languagesale 10% offe-Library read for1 day
REN/SMG-030960Q6R2
- Standard65 pagesEnglish languagesale 10% offe-Library read for1 day
REN/SMG-020460Q7R3
- Standard203 pagesEnglish languagesale 10% offe-Library read for1 day
REN/SMG-020460Q8R1
- Standard243 pagesEnglish languagesale 10% offe-Library read for1 day
REN/SMG-020460Q8
- Standard253 pagesEnglish languagesale 10% offe-Library read for1 day
REN/SMG-020460Q6R3
- Standard215 pagesEnglish languagesale 10% offe-Library read for1 day
REN/SMG-020460Q7R2
- Standard216 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TSGS-020360Q6R3
- Standard110 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TSGS-020360Q7R2
- Standard117 pagesEnglish languagesale 10% offe-Library read for1 day
REN/SMG-020460Q7R1
- Standard216 pagesEnglish languagesale 10% offe-Library read for1 day
REN/SMG-030360Q6R2
- Standard110 pagesEnglish languagesale 10% offe-Library read for1 day
REN/SMG-030360Q7R1
- Standard117 pagesEnglish languagesale 10% offe-Library read for1 day
REN/SMG-030960Q6R1
- Standard65 pagesEnglish languagesale 10% offe-Library read for1 day
REN/SMG-030960Q7R1
- Standard68 pagesEnglish languagesale 10% offe-Library read for1 day
REN/SMG-020460Q6R2
- Standard220 pagesEnglish languagesale 10% offe-Library read for1 day
REN/SMG-030360Q7
- Standard115 pagesEnglish languagesale 10% offe-Library read for1 day
REN/SMG-030960Q7
- Standard67 pagesEnglish languagesale 10% offe-Library read for1 day
REN/SMG-030360Q6R1
- Standard108 pagesEnglish languagesale 10% offe-Library read for1 day
REN/SMG-020460Q6R1
- Standard219 pagesEnglish languagesale 10% offe-Library read for1 day