IEC/TC 76 - Optical radiation safety and laser equipment
To prepare international standards for equipment (including systems) incorporating lasers (and light emitting diodes) or intended only for use with lasers, including those factors introduced by the use of lasers which are needed to characterize equipment and/or which are essential to safe use. The scope includes the preparation of standards applying limits as determined by organizations such as ICNIRP and CIE, to human exposure to optical radiation (100 nm to 1 mm) from artificial sources. Group Safety Function: Aspects of laser radiation pertaining to human safety.
Sécurité des rayonnements optiques et matériels laser
Etablir des normes internationales dans le domaine des équipements (y compris des systèmes) comportant des lasers (et des diodes électroluminescentes) ou destinés à être utilisés uniquement avec des lasers. Sont également couverts les facteurs découlant de l'emploi des lasers qui sont nécessaires à la définition des matériels et/ou essentiels à la sûreté de leur utilisation. Le domaine d'activité comprend la préparation de normes appliquant les limites, telles qu'elles sont établies par l'ICNIRP ou la CIE, de l'exposition humaine aux radiations optiques (entre 100 nm et 1 mm) de sources artificielles.
General Information
This document is applicable to protectors intended to provide protection against accidental exposure to laser radiation within the wavelength range 180Â nm to 1Â mm. It specifies the requirements, test methods and marking. Protectors intended for adjustment work on lasers are included in the scope of this document and are marked in the same way as other protectors, but selection of appropriate eyewear for a specific application is a choice of the user. Laser protective filters used as viewing windows in laser equipment machinery or incorporated into optical instruments such as operating microscopes and loupes that may be used for deliberate viewing of laser radiation as part of their function are outside the scope of this document. Laser radiation in the wavelength range below 180Â nm is absorbed in air, therefore eye and face protection should not be required. This document is applicable to devices intended for patient protection during medical laser procedures except for treatment in the periorbital area. Guidance on eye protectors for patients (including those used for periorbital treatment) is given in ISO/TRÂ 22463.
- Standard19 pagesEnglish languagesale 15% off
- Standard20 pagesFrench languagesale 15% off
- Draft18 pagesEnglish languagesale 15% off
- Draft19 pagesFrench languagesale 15% off
This document describes laser radiation hazards arising in laser processing machines, as defined in 3.7. It also specifies the safety requirements relating to laser radiation hazards, as well as the information to be supplied by the manufacturers of such equipment (in addition to that prescribed by IEC 60825). Requirements dealing with noise as a hazard from laser processing machines are included in ISO 11553‑3:2013. This document is applicable to machines using laser radiation to process materials. It is not applicable to laser products, or equipment containing such products, which are manufactured solely and expressly for the following applications: — photolithography; — stereolithography; — holography; — medical applications (per IEC 60601-2-22); — data storage.
- Standard22 pagesEnglish languagesale 15% off
- Standard23 pagesFrench languagesale 15% off