iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty!
SIST

SIST EN 12259-14:2020/oprA1:2021

(Amendment)

Fixed firefighting systems - Components for sprinkler and water spray systems - Part 14: Sprinklers for residential applications

Fixed firefighting systems - Components for sprinkler and water spray systems - Part 14: Sprinklers for residential applications

This document specifies requirements for the construction and performance of residential sprinklers as well as test methods for their type approval, which are operated by a change of state of an element or bursting of a glass bulb under the influence of heat and incorporating the following types of water seals:
-   conical metal spring with a PTFE gasket or coating;
-   metal cap or disc with PTFE gasket or coating;
-   copper gasket, with or without a PTFE coating.
Sprinklers in accordance with this document will only be used in automatic sprinkler systems for domestic and residential applications as defined in EN 16925.

Ortsfeste Brandbekämpfungsanlagen - Bauteile für Sprinkler- und Sprühwasseranlagen - Teil 14: Sprinkler für die Anwendung im Wohnbereich

Installations fixes de lutte contre l'incendie - Composants des systèmes d'extinction du type sprinkleur et à pulvérisation d'eau - Partie 14: Sprinkleurs pour applications résidentielles

No scope available

Vgrajene naprave za gašenje - Sestavni deli sprinklerskih sistemov in sistemov s pršečo vodo - 14. del: Sprinklerji za uporabo v stanovanjih

General Information

Status
Not Published
Public Enquiry End Date
19-May-2021
ICS
13.220.10 - Fire-fighting
13.220.20 - Fire protection
Technical Committee
POZ - Požarna varnost
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
06-Apr-2021
Due Date
24-Aug-2021
Completion Date
28-May-2021
Ref Project
EN 12259-14:2020/prA1 - Fixed firefighting systems - Components for sprinkler and water spray systems - Part 14: Sprinklers for residential applications

RELATIONS

Amends
SIST EN 12259-14:2020 - Fixed firefighting systems - Components for sprinkler and water spray systems - Part 14: Sprinklers for residential applications
Effective Date
01-May-2021

Buy Standard

SIST EN 12259-14:2020/oprA1:2021SIST EN 12259-14:2020/oprA1:2021
PreviousNext
Amendment
SIST EN 12259-14:2020/oprA1:2021
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 12259-14:2020/oprA1:2021
01-maj-2021
Vgrajene naprave za gašenje - Sestavni deli sprinklerskih sistemov in sistemov s
pršečo vodo - 14. del: Sprinklerji za uporabo v stanovanjih

Fixed firefighting systems - Components for sprinkler and water spray systems - Part 14:

Sprinklers for residential applications

Ortsfeste Brandbekämpfungsanlagen - Bauteile für Sprinkler- und Sprühwasseranlagen -

Teil 14: Sprinkler für die Anwendung im Wohnbereich

Installations fixes de lutte contre l'incendie - Composants des systèmes d'extinction du

type sprinkleur et à pulvérisation d'eau - Partie 14: Sprinkleurs pour applications

résidentielles
Ta slovenski standard je istoveten z: EN 12259-14:2020/prA1
ICS:
13.220.10 Gašenje požara Fire-fighting
SIST EN 12259-14:2020/oprA1:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 12259-14:2020/oprA1:2021
---------------------- Page: 2 ----------------------
SIST EN 12259-14:2020/oprA1:2021
DRAFT
EUROPEAN STANDARD
EN 12259-14:2020
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
March 2021
ICS 13.220.20
English Version
Fixed firefighting systems - Components for sprinkler and
water spray systems - Part 14: Sprinklers for residential
applications

Installations fixes de lutte contre l'incendie - Ortsfeste Brandbekämpfungsanlagen - Bauteile für

Composants des systèmes d'extinction du type Sprinkler- und Sprühwasseranlagen - Teil 14: Sprinkler

sprinkleur et à pulvérisation d'eau - Partie 14: für die Anwendung im Wohnbereich

Sprinkleurs pour applications résidentielles

This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 191.

This draft amendment A1, if approved, will modify the European Standard EN 12259-14:2020. If this draft becomes an

amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for

inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALIS
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 13565-2:2018+AC:2019/AC:2021(Corrigendum)
Fixed firefighting systems - Foam systems - Part 2: Design, construction and maintenance
EN 13565-2:2018+AC:2019/AC:2021

2021-03-31 - TC - Correction of expression in Formula (3) in 4.5.4

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17551:2021(Main)
Fixed firefighting systems - Automatic sprinkler systems - Guidance for earthquake bracing
CEN/TS 17551:2021

This document specifies requirements for earthquake protection of automatic sprinkler systems in accordance with EN 12845 . This document applies only to locations in earthquake zones in accordance to EN 1998-1:2004, 3.2.11) and for area subject to peak ground acceleration above 9 % of g.
This document does not cover all legislative requirements. In certain countries specific national regulations apply and take precedence over this document. Users of this document are advised to inform themselves of the applicability or non-applicability for this document by their national responsible authorities.

  • Technical specification
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical specification
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16750:2017+A1:2020(Main)
Fixed firefighting systems - Oxygen reduction systems - Design, installation, planning and maintenance
EN 16750:2017+A1:2020

This European standard specifies oxygen reduction systems that are used as fire prevention systems by creating an atmosphere in an area which is having a lower permanent oxygen concentration as in ambient conditions. The level of oxygen reduction is defined by the individual risks of these areas (see Annex A). Oxygen reduction is achieved by technical systems which are providing a flux of air containing a reduced concentration of oxygen.
This European standard specifies minimum requirements and defines the specifications governing the design, installation and maintenance of fixed oxygen reduction systems with oxygen reduced air in buildings and industrial production plants. The standard also applies to the extension and modification of existing systems.
This European standard applies to oxygen reduction systems using nitrogen which are designed for continual oxygen reduction in enclosed spaces.
NOTE   Nitrogen is today the most suitable gas to be used for oxygen reduction. For other gases this European standard can be used as basis.
This European standard does not apply to oxygen reduction systems that use water mist or combustion gases.
The European standard does not apply to:
-   explosion suppression systems;
-   explosion prevention systems;
-   fire extinguishing systems using gaseous extinguishing agents;
-   inertization of portable containers;
-   systems in which oxygen levels are reduced for reasons other than fire prevention (e.g. steel processing in the presence of inert gas to avoid the formation of oxide film);
-   inerting required during repair work on systems or equipment (e.g. welding) in order to eliminate the risk of fire or explosion.
In addition to the conditions for the actual oxygen reduction system and its individual components this European standard also covers certain structural specifications for the protected area.
The space protected by an oxygen reduction system is a controlled and continuously monitored indoor climate for extended occupation. This standard does not cover unventilated confined spaces that may contain hazardous gases.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 54-22:2015+A1:2020(Main)
Fire detection and fire alarm systems - Part 22: Resettable line-type heat detectors
EN 54-22:2015+A1:2020

This European Standard applies to resettable line-type heat detectors consisting of a sensing element using an optical fibre, a pneumatic tube or an electrical sensor cable connected to a sensor control unit, either directly or through an interface module, intended for use in fire detection and fire alarm systems installed in and around buildings and other civil engineering works (see EN 54-1:2011).
This European Standard specifies the requirements and performance criteria, the corresponding test methods and provides for the Assessment and Verification of Constancy of Performance (AVCP) of resettable line-type heat detectors to this EN.
This European Standard also covers resettable line-type heat detectors intended for use in the local protection of plant and equipment.
Resettable line-type heat detectors with special characteristics and developed for specific risks are not covered by this EN.
This European Standard does not cover line-type heat detectors that are based on non-resettable, fixed temperature electrical cables (so called digital systems).

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12259-14:2020(Main)
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 14: Sprinklers for residential applications
EN 12259-14:2020

This document specifies requirements for the construction and performance of residential sprinklers as well as test methods for their type approval, which are operated by a change of state of an element or bursting of a glass bulb under the influence of heat, for use only in automatic sprinkler systems for domestic and residential applications as defined in EN 16925:− .
This standard does not cover representative fire and other tests for special sprinklers that are intended to provide for specific fire hazards, nor does it cover fire and other tests for sprinklers for commercial and industrial sprinkler systems as in EN 12845. Those test requirements are covered by EN 12259-1.
NOTE 1   All pressure data in this European Standard are given as gauge pressures in bar.
NOTE 2    Sprinklers according to EN12259-1 can also be used in residential and domestic applications if the system is designed according to EN 12845.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN 3-8:2021(Main)
Portable fire extinguishers - Part 8: Requirements for the construction, pressure resistance and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 3-7
EN 3-8:2021

This European Standard specifies the rules of design, type testing, fabrication and inspection control of portable fire
extinguishers manufactured with metallic bodies as far as pressure risk is concerned.
This part applies to portable fire extinguishers of which the maximum allowable pressure PS is lower than or equal to 30
bar and containing non-explosive, non-flammable, non-toxic and non-oxidising fluids.
This European Standard also applies to the metallic gas cartridge of a volume less than 0,12 l (see Annex E) and gives
guidance for sound engineering practice for metallic gas cartridges equal to or greater than 0,12 l and less than 0,5 l, see
Annex F.
This European Standard does not apply to carbon dioxide fire extinguishers.
NOTE Annex A gives the classification of the different parts forming the portable fire extinguisher.

  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN 14972-15:2021(Main)
Fixed firefighting systems - Water mist systems - Part 15: Test protocol for combustion turbines in enclosures not exceeding 260 m³ for open nozzle systems
FprEN 14972-15

This document specifies fire testing requirements for water mist systems used for fire protection of combustion turbines in enclosures with volumes not exceeding 260 m³.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 12094-8:2020(Main)
Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors
prEN 12094-8

This document specifies product characteristics and describes test methods for flexible and rigid connectors intended to be used in gas extinguishing systems (i.e. CO2, Inert Gas or Halocarbon gas) installed in buildings as a part of a complete operating system.
This document is applicable to the following connectors:
-   Type 1 and Type 5: used between container valves and the manifold
-   Type 3: used in pneumatic pilot lines
-   Type 2 and Type 4: used in distribution pipework of fire extinguishing installations downstream of the manifold/selector valve.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST fprEN 14972-14:2021(Main)
Fixed firefighting systems - Water mist systems - Part 14: Test protocol for combustion turbines in enclosures exceeding 260 m³ for open nozzle systems
FprEN 14972-14

This document specifies fire testing requirements for water mist systems used for fire protection of combustion turbines in enclosures with volumes exceeding 260 m³.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13565-2:2018+AC:2019/AC:2021(Corrigendum)
Fixed firefighting systems - Foam systems - Part 2: Design, construction and maintenance
EN 13565-2:2018+AC:2019/AC:2021

2021-03-31 - TC - Correction of expression in Formula (3) in 4.5.4

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day