oSIST prEN ISO 20345:2020

SLOVENSKI STANDARD
oSIST prEN ISO 20345:2020
01-junij-2020
Osebna varovalna oprema - Zaščitna obutev (ISO/DIS 20345:2020)
Personal protective equipment - Safety footwear (ISO/DIS 20345:2020)
Persönliche Schutzausrüstung - Sicherheitsschuhe (ISO/DIS 20345:2020)

Équipement de protection individuelle - Chaussures de sécurité (ISO/DIS 20345:2020)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

Foreword ..........................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Classification and designs ........................................................................................................................................................................... 8

5 Basic requirements for safety footwear ....................................................................................................................................... 9

5.1 General ........................................................................................................................................................................................................... 9

5.2 Design ..........................................................................................................................................................................................................12

5.2.1 General...................................................................................................................................................................................12

5.2.2 Height of upper ..............................................................................................................................................................12

5.2.3 Heel area ..............................................................................................................................................................................12

5.3 Whole footwear ...................................................................................................................................................................................12

5.3.1 Manufacturing performance ...............................................................................................................................12

5.3.2 Toe protection .................................................................................................................................................................13

5.3.3 Leakproofness .................................................................................................................................................................14

5.3.4 Specific ergonomic features ................................................................................................................................14

5.3.5 Slip resistance .................................................................................................................................................................14

5.3.6 Innocuousness ................................................................................................................................................................15

5.3.7 Seam Strength .................................................................................................................................................................15

5.4 Upper ............................................................................................................................................................................................................15

5.4.1 General...................................................................................................................................................................................15

5.4.2 Thickness .............................................................................................................................................................................16

5.4.3 Tear strength ....................................................................................................................................................................17

5.4.4 Tensile properties ........................................................................................................................................................17

5.4.5 Flexing resistance ...................................................................... ...................................................................................17

5.4.6 Water vapour permeability and coefficient ...........................................................................................17

5.4.7 pH value ................................................................................................................................................................................18

5.4.8 Hydrolysis ...........................................................................................................................................................................18

5.4.9 Chromium VI content ................................................................................................................................................18

5.5 Lining ............................................................................................................................................................................................................18

5.5.1 Tear strength ....................................................................................................................................................................18

5.5.2 Abrasion resistance ....................................................................................................................................................18

5.5.3 Water vapour permeability and coefficient ...........................................................................................18

5.5.4 pH value ................................................................................................................................................................................19

5.5.5 Chromium VI content ................................................................................................................................................19

5.6 Tongue .........................................................................................................................................................................................................19

5.6.1 Tear strength ....................................................................................................................................................................19

5.6.2 pH value ................................................................................................................................................................................19

5.6.3 Chromium VI content ................................................................................................................................................19

5.7 Insole and insock ......... .......................................................................................................................................................................19

5.7.1 Thickness .............................................................................................................................................................................19

5.7.2 pH value ................................................................................................................................................................................19

5.7.3 Water permeability .....................................................................................................................................................19

5.7.4 Water absorption and desorption..................................................................................................................20

5.7.5 Abrasion resistance ....................................................................................................................................................20

5.7.6 Chromium VI content ................................................................................................................................................20

5.8 Outsole ........................................................................................................................................................................................................20

5.8.1 Design .....................................................................................................................................................................................20

5.8.2 Tear strength ....................................................................................................................................................................21

5.8.3 Abrasion resistance ....................................................................................................................................................21

5.8.4 Flexing resistance ...................................................................... ...................................................................................21

5.8.5 Hydrolysis ...........................................................................................................................................................................21

5.8.6 Interlayer bond strength ........................................................................................................................................21

6 Additional requirements for safety footwear .....................................................................................................................22

6.1 General ........................................................................................................................................................................................................22

6.2 Whole footwear ...................................................................................................................................................................................22

6.2.1 Perforation resistance ..............................................................................................................................................22

6.2.2 Electrical properties ..................................................................................................................................................24

6.2.3 Resistance to inimical environments ..........................................................................................................25

6.2.4 Energy absorption of seat region ...................................................................................................................25

6.2.5 Water resistance .................. .................................................... ......................................................................................25

6.2.6 Metatarsal protection ...............................................................................................................................................25

6.2.7 Ankle protection ............................................................................................................................................................26

6.2.8 Cut resistance ..................................................................................................................................................................26

6.2.9 Scuff caps .............................................................................................................................................................................27

6.2.10 Slip resistance .................................................................................................................................................................27

6.3 Upper — Water penetration and absorption.............................................................................................................27

6.4 Outsole ........................................................................................................................................................................................................28

6.4.1 Resistance to hot contact .......................................................................................................................................28

6.4.2 Resistance to fuel oil ..................................................................................................................................................28

6.4.3 Ladder Grip ........................................................................................................................................................................28

7 Marking .......................................................................................................................................................................................................................28

8 Information to be supplied .....................................................................................................................................................................29

8.1 General ........................................................................................................................................................................................................29

8.2 Electrical properties ........................................................................................................................................................................30

8.2.1 Dissipative footwear ..................................................................................................................................................30

8.2.2 Antistatic footwear .....................................................................................................................................................30

8.3 Insocks ........................................................................................................................................................................................................31

8.4 Perforation resistance ......... ...........................................................................................................................................................31

8.5 Obsolescence deadline ..................................................................................................................................................................32

Annex A (normative) Customized safety footwear (adapted to fit an individual user or a

single unit to fit an individual user) ..............................................................................................................................................33

Annex B (informative) Assessment of the footwear by the wearer ...................................................................................37

Annex C (informative) Slip Resistance .............................................................................................................................................................39

Annex ZA (informative) Relationship between this European Standard and the essential

requirements of PPE Regulation 2016/425 aimed to be covered ..................................................................42

Bibliography .............................................................................................................................................................................................................................44

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

Any trade name used in this document is information given for the convenience of users and does not

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/

ISO 20345 was prepared by the European Committee for Standardization (CEN) Technical Committee

CEN/TC 161, Foot and leg protectors, in collaboration with Technical Committee ISO/TC 94, Personal

safety — Protective clothing and equipment, Subcommittee SC 3, Foot protection, in accordance with the

This third edition cancels and replaces the second edition (ISO 20345:2011), which has been technically

— toe protection, depending on ISO 22568-1 and ISO 22568-2, exchanging EN 12568:2010;

— requirement on slip resistance revised (5.3.5 and 6.2.10); marking “SR” introduced;

— perforation resistant insert, depending on ISO 22568-3 and ISO 22568-4, exchanging EN 12568:2010;

— former Annex A Hybrid Footwear included in the general text (Table 2, 6.2.5.2, Table 16);

Any feedback or questions on this document should be directed to the user’s national standards body. A

This International Standard specifies basic and additional (optional) requirements for safety footwear

used for general purpose. It includes, for example, mechanical risks, slip resistance, thermal risks,

ergonomic behaviour. It also specifies requirements for orthopaedic customized or individual

manufactured orthopaedic safety footwear. This standard does not cover the property of high visibility

because of interaction with the clothing (e.g. trousers cover the footwear) and work area conditions

Special risks are covered by complementary job-related standards (e.g. footwear for firefighters,

electrical insulating footwear, protection against chain saw injuries, protection against chemicals and

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 22568-1:2019, Foot and leg protectors — Requirements and test methods for footwear components —

ISO 22568-2:2019, Foot and leg protectors — Requirements and test methods for footwear component —

ISO 22568-3:2019, Foot and leg protectors — Requirements and test methods for footwear components —

ISO 22568-4:2019, Foot and leg protectors — Requirements and test methods for footwear components —

ISO 21064:2017, Prosthetics and orthotics — Foot orthotics — Uses, functions classification and description

Note 1 to entry The component parts of footwear are illustrated in Figure 1, Figure 2 and Figure 3.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

footwear incorporating safety features to protect the wearer from injuries that could arise through

Note 1 to entry: Items of safety footwear are fitted with toecaps designed to give protection against impact of at

part or parts of a footwear that cover the toes, the top of the foot, the sides of the foot, and optionally

flesh or middle part of a hide or skin, obtained by splitting a thick leather, which is tanned to be

large molecules composed of repeating structural units (monomers) typically connected by chemical bond

non-removable component used to form the base of the shoe to which the upper is usually attached

removable or non-removable footwear component used to cover completely the insole

removable or non-removable footwear component used to cover the insole in the heel area footbed

removable or non-removable footwear component used to cover completely the insole; shaped according

Note 1 to entry: “Non-removable” means that the component cannot be removed without any damage.

Note 2 to entry: “Removable” means, that the component can be removed, but it must be placed in the footwear

Note 2 to entry: Where an upper is split at the forepart to house the toecap, or if an external piece of material is

stitched to the upper to form a pocket to house the toecap, the material under the toecap acts as a lining.

Component, placed in the outsole complex or used as an insole simultaneously in order to provide

component, placed in the footwear to protect the toes of the wearer from impacts and compression

abrasion resistant material or component to protect against scuff of the upper external toe region

footwear with low resistance between the wearer and the ground, able to dissipate some static

Footwear maintaining some resistance between the wearer and the ground, able to dissipate some

EXAMPLE Footwear for firefighters; footwear with resistance to chain saw cutting.

covering all individual orthotic footwear according to ISO 21064:2017, 3.2 and other specific conditions

of a foot. They integrate in their design the recipient’s own physiognomy and the specific arrangements

aimed at modifying, correcting, compensating, curing, preventing, relieving a pathology, e.g.