Information technology – Fibre channel — Part 147: Physical interfaces - 7 (FC-PI-7)

This standard describes the physical interface portions of high performance optical link variants that support the higher level Fibre Channel protocols including FC-FS-4 (reference [1]) and FC-FS-5 (reference [2]). FC-PI-7 specifies 64GFC. 32GFC and 128GFC are described in FC-PI-6 (reference [3]) and FC-PI- 6P (reference [4]), respectively.16GFC, 8GFC and 4GFC are described in FC-PI-5 (reference [5]).

Technologies de l'information — Canal de fibres — Partie 147: Titre manque

General Information

Status
Published
Publication Date
07-Feb-2021
Current Stage
6060 - International Standard published
Start Date
08-Feb-2021
Due Date
30-Mar-2022
Completion Date
08-Feb-2021
Ref Project

Buy Standard

Standard
ISO/IEC 14165-147:2021 - Information technology – Fibre channel
English language
45 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO/IEC 14165-147:Version 05-dec-2020 - Information technology – Fibre channel
English language
45 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 14165-147
First edition
2021-02
Information technology – Fibre
channel —
Part 147:
Physical interfaces - 7 (FC-PI-7)
Reference number
ISO/IEC 14165-147:2021(E)
©
ISO/IEC 2021

---------------------- Page: 1 ----------------------
ISO/IEC 14165-147:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2021 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 14165-147:2021(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of document should be noted (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details
of any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents) or the IEC list of patent
declarations received (see http://patents.iec.ch).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT),
see www.iso.org/iso/foreword.html.
This document was prepared by the InterNational Committee for Information Technology Standards
(INCITS) (as INCITS 543-2019) and drafted in accordance with its editorial rules. It was assigned to Joint
Technical Committee ISO/IEC JTC 1, Information technology, and adopted under the “fast-track
procedure”.
A list of all parts in the ISO/IEC 14165 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
© ISO/IEC 2021 – All rights reserved
iii

---------------------- Page: 3 ----------------------
ISO/IEC 14165-147:2021(E)
Contents
1  Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2  Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.1  General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.2  Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.2.1  Approved references. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.2.2  References under development . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3  Definitions and conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.1  Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.2  Editorial conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3.2.1  Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3.2.2  Keywords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.2.3  Abbreviations, acronyms, and symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.2.3.1  Acronyms and other abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.2.3.2  Signaling rate abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4  FC-PI-7 functional characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.1  General characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.2  Compliance test points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.3  FC-0 functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.3.1  Transmitter functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.3.2  Receiver functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.4  Limitations on invalid code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.5  Receiver stabilization time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.6  Loss of signal (Rx_LOS) function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.7  Speed agile ports that support speed negotiation and training . . . . . . . . . . . . . . . . . . . . . 14
4.8  Transmission codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.9  Frame scrambling and emission lowering protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.10  Forward error correction (FEC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.11  Bit error ratio per link locations and segments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.12  FC-PI-7 variants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5  Optical interface specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5.1  TxRx connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5.2  Laser safety issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5.3  Optical signal modulation format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5.4  SM data links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.4.1  SM general information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.4.2  SM optical output interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.4.3  SM optical input interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.4.4  Transmitter transition time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.4.5  TDECQ Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.4.6  SECQ Measurement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.4.7  SRS Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.5  MM data links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.5.1  MM general information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.5.2  MM optical output interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.5.3  MM optical input interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.5.4  Transmitter transition time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.5.5  TDECQ Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
i
© ISO/IEC 2021 – All rights reserved
v

---------------------- Page: 4 ----------------------
ISO/IEC 14165-147:2021(E)
5.5.6  SECQ Measurement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5.5.7  SRS Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5.6  SM Cable Plant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
5.6.1  Cable plant overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
5.6.2  Optical Return Loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
5.6.3  Connector and Splices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
5.7  MM Cable Plant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
5.7.1  Cable plant overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
5.7.2  Optical Return Loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
5.7.3  Connector and Splices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
6  Electrical interface specification - single lane segments. . . . . . . . . . . . . . . . . . . . . . . . . . 25
6.1  General electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
6.2  Compliance test point definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6.2.1  Test method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6.2.2  Host test points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6.2.3  Module test points. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6.2.4  Host input calibration point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.2.5  Module input calibration point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6.3  Transmitted signal characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
6.4  Receive signal characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
6.5  Differential return loss and mode conversion requirements . . . . . . . . . . . . . . . . . . . . . . . 31
6.5.1  Differential return loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
6.5.2  Common to differential-mode and differential to common-mode conversion . . . . . . . 31
7  Backplane variant, 64GFC-EA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
7.1  TxRx Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
7.2  Test Fixtures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
7.3  Transmitter specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
7.4  Receiver specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
7.4.1  Receiver input return loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
7.4.2  Receiver interference tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
7.4.3  Receiver jitter tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
7.5  Channel Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
7.5.1  Channel Operating Margin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
7.5.2  Channel Return Loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
7.5.3  Channel AC coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Annex A  (informative)
Optical cable plant usage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Annex B  (informative)
Structured cabling environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
B.1  Specification of operating distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
B.2  Alternate connection loss operating distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Annex C  (informative)
Electrical channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
ii
© ISO/IEC 2021 – All rights reserved
vi

---------------------- Page: 5 ----------------------
ISO/IEC 14165-147:2021(E)
List of Tables
Table 1 - ISO convention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Table 2 - Acronyms and other abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Table 3 - Signaling rate abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Table 4 - BER per link Location / Segment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Table 5 - Fibre Channel Variants in FC-PI-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Table 6 - Single-mode link parameters (OS2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Table 7 - Multimode link parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Table 8 - Maximum value of each discrete reflectance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Table 9 - General electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Table 10 - Transmitter compliance requirements at nominal signal rate of 28 900 MBd . . . . . . . 29
Table 11 - Receiver compliance requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Table 12 - Transmitter electrical specifications at A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Table 13 - Summary of receiver characteristics at test point D. . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Table 14 - Receiver interference tolerance parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Table 15 - Receiver jitter tolerance parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Table 16 - Channel Operating Margin (COM) parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Table A.1 - Worst case (nominal bandwidth) multimode cable link power budget . . . . . . . . . . . . 42
Table A.2 - Worst-case single mode cable link power budget . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Table B.1 - 64GFC-SW (MM) and 64GFC-LW (SM) max operating distance & loss
budget for different connection losses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Table C.1 - Informative host to module channel characteristics, high loss channel . . . . . . . . . . . 45
iii
© ISO/IEC 2021 – All rights reserved
vii

---------------------- Page: 6 ----------------------
ISO/IEC 14165-147:2021(E)
List of Figures
Figure 1 - Fibre Channel hierarchy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Figure 2 - Compliance points for 64GFC PMDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Figure 3 - BER per Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Figure 4 - Optical Eye Diagram of a PAM4 Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Figure 5 - Host Compliance Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Figure 6 - Module Compliance Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Figure 7 - Host input calibration point C". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Figure 8 - Module input calibration point B" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Figure 9 - SDD11 and SDD22 for all compliance points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Figure 10 - SDC22 for transmitter output and SCD11 for receiver input. . . . . . . . . . . . . . . . . . . . 32
Figure 11 - Test fixture and test points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Figure 12 - Test fixture reference insertion loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Figure 13 - Test fixture differential return loss. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Figure 14 - Transmitter and receiver differential return loss limit . . . . . . . . . . . . . . . . . . . . . . . . . 36
Figure 15 - Transmitter common-mode return loss. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Figure 16 - Receiver differential to common-mode return loss limit . . . . . . . . . . . . . . . . . . . . . . . 38
Figure 17 - Channel return loss limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Figure C.1 - Typical FC-PI-7 electrical channel construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Figure C.2 - FC-PI-7 full channel electrical reference model, high loss channel. . . . . . . . . . . . . . 45
iv
© ISO/IEC 2021 – All rights reserved
viii

---------------------- Page: 7 ----------------------
ISO/IEC 14165-147:2021(E)
Foreword  (This foreword is not part of American National Standard INCITS 543-2019.)
This standard was developed by Task Group T11.2 of Accredited Standards Commit-
tee INCITS during 2016, 2017, and 2018. The standards approval process will be
started in 2018. This document includes annexes that are informative and are not
considered part of the standard.
Requests for interpretation, suggestions for improvements or addenda, or defect re-
ports are welcomed. They should be sent to the INCITS Secretariat, Information
Technology Industry Council, 700 K Street NW, Suite 600, Washington DC 20001.
This standard was processed and approved for submittal to ANSI by the National
Committee for Information Technology Standards (INCITS). Committee approval of
the standard does not necessarily imply that all committee members voted for its ap-
proval. At the time it approved this standard, INCITS had the following members:
Laura Lindsay, Chair
Donald Deutsch, Vice-Chair
Jennifer Garner, Secretary
Organization Represented Name of Representative
Adobe Systems, Inc. Scott Foshee
AIM Global, Inc. . Steve Halliday
Mary Lou Bosco (Alt.)
Chuck Evanhoe (Alt.)
Amazon Web Services, Inc. . Oliver Bell
John Britton (Alt.)
Apple . Helene Workman
David Singer (Alt.)
Anna Weinberg (Alt.)
CA Technologies . Ron Doyle
Department of Commerce - NIST. Michael Hogan
Wo Chang (Alt.)
Sal Francomacaro (Alt.)
Farance, Inc. Frank Farance
Timothy Schoechle (Alt.)
Futurewei Technologies, Inc. Wael Diab
Wilbert Adams (Alt.)
Timothy Jeffries (Alt.)
Google . Catherine Nelson
Tommy Ward (Alt.)
GS1GO. Steven Keddie
Edward Merrill (Alt.)
Dan Mullen (Alt.)
HP, Inc. Karen Higginbottom
Paul Jeran (Alt.)
Lonnie Mandigo (Alt.)
Vanitha Venkateshlu (Alt.)
IBM Corporation . Steve Holbrook
Alexander Tarpinian (Alt.)
Intel Corporation . Philip Wennblom
Grace Wei (Alt.)
Microsoft Corporation . Laura Lindsay
John Calhoon (Alt.)
Oracle . Donald Deutsch
Anish Karmarkar (Alt.)
Michael Kavanaugh (Alt.)
Jim Melton (Alt.)
Jan-Eike Michels (Alt.)
Elaine Newton (Alt.)
Qualcomm, Inc. . Michael Atlass
Farrokh Khatibi (Alt.)
Telecommunications Industry Association (TIA). Florence Otieno
Marianna Kramarikova (Alt.)
v
© ISO/IEC 2021 – All rights reserved
ix

---------------------- Page: 8 ----------------------
ISO/IEC 14165-147:2021(E)
Organization Represented Name of Representative
VMware, Inc. Stephen Diamond
Salim AbiEzzi (Alt.)
Eric Betts (Alt.)
Lawrence Lamers (Alt.)
Technical Committee T11 on Lower Level Interfaces, which reviewed this standard,
had the following members:
Steven Wilson, Chair
Craig W. Carlson, Vice-Chair
Richard Johnson, Secretary
David Peterson, International Representative
Organization Represented Name of Representative
Amphenol Corporation. Gregory McSorley
Brad Brubaker (Alt.)
Mike Davis (Alt.)
Daniel Dillow (Alt.)
Chris Lyon (Alt.)
Alex Persaud (Alt.)
Hu Silver (Alt.)
Michael Wingard (Alt.)
Anritsu Corporation. Ken Mochizuki
Broadcom Limited. Steven Wilson
David Baldwin (Alt.)
Evan Beauprez (Alt.)
Ben Chu (Alt.)
Adam Healey (Alt.)
Howard Johnson (Alt.)
Mark Jones (Alt.)
Scott Kipp (Alt.)
Anil Mehta (Alt.)
David Peterson (Alt.)
Rob Peterson (Alt.)
James Smart (Alt.)
CIENA. Stephen Shew
Sebastien Gareau (Alt.)
Cisco Systems, Inc. Mike Blair
Harsha Bharadwaj (Alt.)
Rajesh LG (Alt.)
Fabio Maino (Alt.)
J. Metz (Alt.)
Landon Noll (Alt.)
Joe Pelissier (Alt.)
CommScope. Sunny Xu
Gary Gibbs (Alt.)
Gary Irwin (Alt.)
Paul Kolesar (Alt.)
Corning, Inc. . Doug Coleman
Steven Swanson (Alt.)
Data Center Systems . Kevin Ehringer
Zach Nason (Alt.)
Todd Wheeler (Alt.)
Dell, Inc. Louis Ricci
David Black (Alt.)
Gaurav Chawla (Alt.)
Alan Rajapa (Alt.)
Erik Smith (Alt.)
Joseph White (Alt.)
Jeff Young (Alt.)
vi
© ISO/IEC 2021 – All rights reserved
x

---------------------- Page: 9 ----------------------
ISO/IEC 14165-147:2021(E)
Organization Represented Name of Representative
Finisar Corporation.Chris Yien
Richard Johnson (Alt.)
Jonathan King (Alt.)
Foxconn Interconnect Technology, Ltd. (FIT) .John Petrilla
Eric Chu (Alt.)
Fred Fons (Alt.)
Glenn Moore (Alt.)
William Peters (Alt.)
Fujitsu America, Inc.Mark Malcolm
Kun Katsumata (Alt.)
Osamu Kimura (Alt.)
Gene Owens (Alt.)
Futurewei Technologies, Inc. .Philip Kufeldt
Victor Gissin (Alt.)
Yang Liu (Alt.)
Xu Qi-ming (Alt.)
Liu Qing (Alt.)
Xin Qiu (Alt.)
Eddy Zhou (Alt.)
GlobalFoundries US2 LLC .Adrian Butter
John Ewen (Alt.)
Jon Garlett (Alt.)
Hewlett-Packard Enterprise .Barry Maskas
Curtis Ballard (Alt.)
Rupin Mohan (Alt.)
Krishna Babu Puttagunta (Alt.)
Hitachi Vantara.Eric Hibbard
Vincent Franceschini (Alt.)
Michael Hay (Alt.)
Akinobu Shimada (Alt.)
Erwin van Londen (Alt.)
Ken Wood (Alt.)
IBM Corporation .Roger Hathorn
Patty Driever (Alt.)
Keysight Technologies, Inc. .Stephen Didde
Steven Sekel (Alt.)
Hajime Takahashi (Alt.)
Joachim Vobis (Alt.)
Lumentum Operations.David Lewis
Macom .Thomas Palkert
MediaTek USA, Inc. .Tamer Ali
Mau-Lin Wu (Alt.)
Microsoft Corporation.Lee Prewitt
Paul Luber (Alt.)
Steve Olsson (Alt.)
Molex, Inc.Alexandra Haser
Jay Neer (Alt.)
Scott Sommers (Alt.)
NetApp, Inc. .Frederick Knight
John Meneghini (Alt.)
Urmi Misra (Alt.)
OFS Fitel LLC .Roman Shubochkin
Mabud Choudhury (Alt.)
Panduit Corporation .Jose Castro
Bulent Kose (Alt.)
Robert Reid (Alt.)
Steve Skiest (Alt.)
vii
© ISO/IEC 2021 – All rights reserved
xi

---------------------- Page: 10 ----------------------
ISO/IEC 14165-147:2021(E)
Organization Represented Name of Representative
QLogic Corporation . Craig Carlson
Anshul Agarwal (Alt.)
Girish Basrur (Alt.)
Kathy Caballero (Alt.)
Robert Friend (Alt.)
Duane Grigsby (Alt.)
Ali Khwaja (Alt.)
Stephen Lam (Alt.)
Ray Leung (Alt.)
Akinori Maeda (Alt.)
Praveen Midha (Alt.)
Trinh Nguyen (Alt.)
Raul Oteyza (Alt.)
Alan Spalding (Alt.)
Gourangadoss Sundar (Alt.)
Darren Trapp (Alt.)
Andrew Vasquez (Alt.)
Dean Wallace (Alt.)
SmartDV Technologies India Private Limited. Deepak Kumar Tala
Tamil Selvan Ramanathan (Alt.)
TE Connectivity . Nathan Tracy
Jeff Mason (Alt.)
Teledyne LeCroy Corporation . David Rodgers
Douglas Lee (Alt.)
Henry Poelstra (Alt.)
Unisys Corporation. Jeffrey Dremann
Ph
...

INTERNATIONAL ISO
STANDARD 14165-147
First edition
Information technology —
Fibre channel —
Part 147:
Physical interfaces - 7 (FC-PI-7)
PROOF/ÉPREUVE
Reference number
ISO 14165-147:2020(E)
©
ISO/IEC 2020

---------------------- Page: 1 ----------------------
ISO/IEC 14165-147:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii PROOF/ÉPREUVE © ISO/IEC 2020 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 14165-147:2020(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of document should be noted (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details
of any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents) or the IEC list of patent
declarations received (see http://patents.iec.ch).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT),
see www.iso.org/iso/foreword.html.
This document was prepared by the InterNational Committee for Information Technology Standards
(INCITS) (as INCITS 543-2019) and drafted in accordance with its editorial rules. It was assigned to Joint
Technical Committee ISO/IEC JTC 1, Information technology, and adopted under the “fast-track
procedure”.
A list of all parts in the ISO/IEC 14165 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
© ISO/IEC 2020 – All rights reserved

---------------------- Page: 3 ----------------------
ISO/IEC 14165-147:2020(E)
Contents
1  Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2  Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.1  General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.2  Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.2.1  Approved references. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.2.2  References under development . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3  Definitions and conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.1  Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.2  Editorial conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3.2.1  Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3.2.2  Keywords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.2.3  Abbreviations, acronyms, and symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.2.3.1  Acronyms and other abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.2.3.2  Signaling rate abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4  FC-PI-7 functional characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.1  General characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.2  Compliance test points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.3  FC-0 functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.3.1  Transmitter functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.3.2  Receiver functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.4  Limitations on invalid code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.5  Receiver stabilization time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.6  Loss of signal (Rx_LOS) function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.7  Speed agile ports that support speed negotiation and training . . . . . . . . . . . . . . . . . . . . . 14
4.8  Transmission codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.9  Frame scrambling and emission lowering protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.10  Forward error correction (FEC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.11  Bit error ratio per link locations and segments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.12  FC-PI-7 variants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5  Optical interface specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5.1  TxRx connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5.2  Laser safety issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5.3  Optical signal modulation format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5.4  SM data links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.4.1  SM general information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.4.2  SM optical output interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.4.3  SM optical input interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.4.4  Transmitter transition time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.4.5  TDECQ Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.4.6  SECQ Measurement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.4.7  SRS Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.5  MM data links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.5.1  MM general information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.5.2  MM optical output interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.5.3  MM optical input interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.5.4  Transmitter transition time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.5.5  TDECQ Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
i
© ISO/IEC 2020 – All rights reserved

---------------------- Page: 4 ----------------------
ISO/IEC 14165-147:2020(E)
5.5.6  SECQ Measurement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5.5.7  SRS Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5.6  SM Cable Plant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
5.6.1  Cable plant overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
5.6.2  Optical Return Loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
5.6.3  Connector and Splices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
5.7  MM Cable Plant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
5.7.1  Cable plant overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
5.7.2  Optical Return Loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
5.7.3  Connector and Splices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
6  Electrical interface specification - single lane segments. . . . . . . . . . . . . . . . . . . . . . . . . . 25
6.1  General electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
6.2  Compliance test point definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6.2.1  Test method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6.2.2  Host test points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6.2.3  Module test points. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6.2.4  Host input calibration point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.2.5  Module input calibration point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6.3  Transmitted signal characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
6.4  Receive signal characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
6.5  Differential return loss and mode conversion requirements . . . . . . . . . . . . . . . . . . . . . . . 31
6.5.1  Differential return loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
6.5.2  Common to differential-mode and differential to common-mode conversion . . . . . . . 31
7  Backplane variant, 64GFC-EA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
7.1  TxRx Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
7.2  Test Fixtures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
7.3  Transmitter specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
7.4  Receiver specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
7.4.1  Receiver input return loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
7.4.2  Receiver interference tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
7.4.3  Receiver jitter tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
7.5  Channel Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
7.5.1  Channel Operating Margin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
7.5.2  Channel Return Loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
7.5.3  Channel AC coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Annex A  (informative)
Optical cable plant usage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Annex B  (informative)
Structured cabling environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
B.1  Specification of operating distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
B.2  Alternate connection loss operating distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Annex C  (informative)
Electrical channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
ii
© ISO/IEC 2020 – All rights reserved

---------------------- Page: 5 ----------------------
ISO/IEC 14165-147:2020(E)
List of Tables
Table 1 - ISO convention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Table 2 - Acronyms and other abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Table 3 - Signaling rate abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Table 4 - BER per link Location / Segment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Table 5 - Fibre Channel Variants in FC-PI-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Table 6 - Single-mode link parameters (OS2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Table 7 - Multimode link parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Table 8 - Maximum value of each discrete reflectance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Table 9 - General electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Table 10 - Transmitter compliance requirements at nominal signal rate of 28 900 MBd . . . . . . . 29
Table 11 - Receiver compliance requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Table 12 - Transmitter electrical specifications at A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Table 13 - Summary of receiver characteristics at test point D. . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Table 14 - Receiver interference tolerance parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Table 15 - Receiver jitter tolerance parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Table 16 - Channel Operating Margin (COM) parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Table A.1 - Worst case (nominal bandwidth) multimode cable link power budget . . . . . . . . . . . . 42
Table A.2 - Worst-case single mode cable link power budget . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Table B.1 - 64GFC-SW (MM) and 64GFC-LW (SM) max operating distance & loss
budget for different connection losses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Table C.1 - Informative host to module channel characteristics, high loss channel . . . . . . . . . . . 45
iii
© ISO/IEC 2020 – All rights reserved

---------------------- Page: 6 ----------------------
ISO/IEC 14165-147:2020(E)
List of Figures
Figure 1 - Fibre Channel hierarchy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Figure 2 - Compliance points for 64GFC PMDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Figure 3 - BER per Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Figure 4 - Optical Eye Diagram of a PAM4 Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Figure 5 - Host Compliance Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Figure 6 - Module Compliance Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Figure 7 - Host input calibration point C". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Figure 8 - Module input calibration point B" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Figure 9 - SDD11 and SDD22 for all compliance points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Figure 10 - SDC22 for transmitter output and SCD11 for receiver input. . . . . . . . . . . . . . . . . . . . 32
Figure 11 - Test fixture and test points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Figure 12 - Test fixture reference insertion loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Figure 13 - Test fixture differential return loss. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Figure 14 - Transmitter and receiver differential return loss limit . . . . . . . . . . . . . . . . . . . . . . . . . 36
Figure 15 - Transmitter common-mode return loss. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Figure 16 - Receiver differential to common-mode return loss limit . . . . . . . . . . . . . . . . . . . . . . . 38
Figure 17 - Channel return loss limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Figure C.1 - Typical FC-PI-7 electrical channel construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Figure C.2 - FC-PI-7 full channel electrical reference model, high loss channel. . . . . . . . . . . . . . 45
iv
© ISO/IEC 2020 – All rights reserved

---------------------- Page: 7 ----------------------
ISO/IEC 14165-147:2020(E)
Foreword  (This foreword is not part of American National Standard INCITS 543-2019.)
This standard was developed by Task Group T11.2 of Accredited Standards Commit-
tee INCITS during 2016, 2017, and 2018. The standards approval process will be
started in 2018. This document includes annexes that are informative and are not
considered part of the standard.
Requests for interpretation, suggestions for improvements or addenda, or defect re-
ports are welcomed. They should be sent to the INCITS Secretariat, Information
Technology Industry Council, 700 K Street NW, Suite 600, Washington DC 20001.
This standard was processed and approved for submittal to ANSI by the National
Committee for Information Technology Standards (INCITS). Committee approval of
the standard does not necessarily imply that all committee members voted for its ap-
proval. At the time it approved this standard, INCITS had the following members:
Laura Lindsay, Chair
Donald Deutsch, Vice-Chair
Jennifer Garner, Secretary
Organization Represented Name of Representative
Adobe Systems, Inc. Scott Foshee
AIM Global, Inc. . Steve Halliday
Mary Lou Bosco (Alt.)
Chuck Evanhoe (Alt.)
Amazon Web Services, Inc. . Oliver Bell
John Britton (Alt.)
Apple . Helene Workman
David Singer (Alt.)
Anna Weinberg (Alt.)
CA Technologies . Ron Doyle
Department of Commerce - NIST. Michael Hogan
Wo Chang (Alt.)
Sal Francomacaro (Alt.)
Farance, Inc. Frank Farance
Timothy Schoechle (Alt.)
Futurewei Technologies, Inc. Wael Diab
Wilbert Adams (Alt.)
Timothy Jeffries (Alt.)
Google . Catherine Nelson
Tommy Ward (Alt.)
GS1GO. Steven Keddie
Edward Merrill (Alt.)
Dan Mullen (Alt.)
HP, Inc. Karen Higginbottom
Paul Jeran (Alt.)
Lonnie Mandigo (Alt.)
Vanitha Venkateshlu (Alt.)
IBM Corporation . Steve Holbrook
Alexander Tarpinian (Alt.)
Intel Corporation . Philip Wennblom
Grace Wei (Alt.)
Microsoft Corporation . Laura Lindsay
John Calhoon (Alt.)
Oracle . Donald Deutsch
Anish Karmarkar (Alt.)
Michael Kavanaugh (Alt.)
Jim Melton (Alt.)
Jan-Eike Michels (Alt.)
Elaine Newton (Alt.)
Qualcomm, Inc. . Michael Atlass
Farrokh Khatibi (Alt.)
Telecommunications Industry Association (TIA). Florence Otieno
Marianna Kramarikova (Alt.)
v
© ISO/IEC 2020 – All rights reserved

---------------------- Page: 8 ----------------------
ISO/IEC 14165-147:2020(E)
Organization Represented Name of Representative
VMware, Inc. Stephen Diamond
Salim AbiEzzi (Alt.)
Eric Betts (Alt.)
Lawrence Lamers (Alt.)
Technical Committee T11 on Lower Level Interfaces, which reviewed this standard,
had the following members:
Steven Wilson, Chair
Craig W. Carlson, Vice-Chair
Richard Johnson, Secretary
David Peterson, International Representative
Organization Represented Name of Representative
Amphenol Corporation. Gregory McSorley
Brad Brubaker (Alt.)
Mike Davis (Alt.)
Daniel Dillow (Alt.)
Chris Lyon (Alt.)
Alex Persaud (Alt.)
Hu Silver (Alt.)
Michael Wingard (Alt.)
Anritsu Corporation. Ken Mochizuki
Broadcom Limited. Steven Wilson
David Baldwin (Alt.)
Evan Beauprez (Alt.)
Ben Chu (Alt.)
Adam Healey (Alt.)
Howard Johnson (Alt.)
Mark Jones (Alt.)
Scott Kipp (Alt.)
Anil Mehta (Alt.)
David Peterson (Alt.)
Rob Peterson (Alt.)
James Smart (Alt.)
CIENA. Stephen Shew
Sebastien Gareau (Alt.)
Cisco Systems, Inc. Mike Blair
Harsha Bharadwaj (Alt.)
Rajesh LG (Alt.)
Fabio Maino (Alt.)
J. Metz (Alt.)
Landon Noll (Alt.)
Joe Pelissier (Alt.)
CommScope. Sunny Xu
Gary Gibbs (Alt.)
Gary Irwin (Alt.)
Paul Kolesar (Alt.)
Corning, Inc. . Doug Coleman
Steven Swanson (Alt.)
Data Center Systems . Kevin Ehringer
Zach Nason (Alt.)
Todd Wheeler (Alt.)
Dell, Inc. Louis Ricci
David Black (Alt.)
Gaurav Chawla (Alt.)
Alan Rajapa (Alt.)
Erik Smith (Alt.)
Joseph White (Alt.)
Jeff Young (Alt.)
vi
© ISO/IEC 2020 – All rights reserved

---------------------- Page: 9 ----------------------
ISO/IEC 14165-147:2020(E)
Organization Represented Name of Representative
Finisar Corporation.Chris Yien
Richard Johnson (Alt.)
Jonathan King (Alt.)
Foxconn Interconnect Technology, Ltd. (FIT) .John Petrilla
Eric Chu (Alt.)
Fred Fons (Alt.)
Glenn Moore (Alt.)
William Peters (Alt.)
Fujitsu America, Inc.Mark Malcolm
Kun Katsumata (Alt.)
Osamu Kimura (Alt.)
Gene Owens (Alt.)
Futurewei Technologies, Inc. .Philip Kufeldt
Victor Gissin (Alt.)
Yang Liu (Alt.)
Xu Qi-ming (Alt.)
Liu Qing (Alt.)
Xin Qiu (Alt.)
Eddy Zhou (Alt.)
GlobalFoundries US2 LLC .Adrian Butter
John Ewen (Alt.)
Jon Garlett (Alt.)
Hewlett-Packard Enterprise .Barry Maskas
Curtis Ballard (Alt.)
Rupin Mohan (Alt.)
Krishna Babu Puttagunta (Alt.)
Hitachi Vantara.Eric Hibbard
Vincent Franceschini (Alt.)
Michael Hay (Alt.)
Akinobu Shimada (Alt.)
Erwin van Londen (Alt.)
Ken Wood (Alt.)
IBM Corporation .Roger Hathorn
Patty Driever (Alt.)
Keysight Technologies, Inc. .Stephen Didde
Steven Sekel (Alt.)
Hajime Takahashi (Alt.)
Joachim Vobis (Alt.)
Lumentum Operations.David Lewis
Macom .Thomas Palkert
MediaTek USA, Inc. .Tamer Ali
Mau-Lin Wu (Alt.)
Microsoft Corporation.Lee Prewitt
Paul Luber (Alt.)
Steve Olsson (Alt.)
Molex, Inc.Alexandra Haser
Jay Neer (Alt.)
Scott Sommers (Alt.)
NetApp, Inc. .Frederick Knight
John Meneghini (Alt.)
Urmi Misra (Alt.)
OFS Fitel LLC .Roman Shubochkin
Mabud Choudhury (Alt.)
Panduit Corporation .Jose Castro
Bulent Kose (Alt.)
Robert Reid (Alt.)
Steve Skiest (Alt.)
vii
© ISO/IEC 2020 – All rights reserved

---------------------- Page: 10 ----------------------
ISO/IEC 14165-147:2020(E)
Organization Represented Name of Representative
QLogic Corporation . Craig Carlson
Anshul Agarwal (Alt.)
Girish Basrur (Alt.)
Kathy Caballero (Alt.)
Robert Friend (Alt.)
Duane Grigsby (Alt.)
Ali Khwaja (Alt.)
Stephen Lam (Alt.)
Ray Leung (Alt.)
Akinori Maeda (Alt.)
Praveen Midha (Alt.)
Trinh Nguyen (Alt.)
Raul Oteyza (Alt.)
Alan Spalding (Alt.)
Gourangadoss Sundar (Alt.)
Darren Trapp (Alt.)
Andrew Vasquez (Alt.)
Dean Wallace (Alt.)
SmartDV Technologies India Private Limited. Deepak Kumar Tala
Tamil Selvan Ramanathan (Alt.)
TE Connectivity . Nathan Tracy
Jeff Mason (Alt.)
Teledyne LeCroy Corporation . David Rodgers
Douglas Lee (Alt.)
Henry Poelstra (Alt.)
Unisys Corporation. Jeffrey Dremann
Phil Shelton (Alt
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.