High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV

IEC 62271-111:2012(E) applies to all overhead, pad mounted, dry vault and submersible single or multi-pole alternating current automatic circuit reclosers and fault interrupters for rated maximum voltages above 1 000 V and up to 38 kV. This second edition cancels and replaces the first edition, published in 2005, and constitutes a technical revision. The main changes with respect to the previous edition are as follows:
a) addition of exclusion of devices with dependent manual operation to 1.1;
b) harmonization of the amplitude factor kaf used for calculating the TRV for cable connected systems consistent with recent harmonization of the circuit-breaker standards between IEEE and IEC;
c) deletion of requirements for radio influence voltage (RIV) tests;
d) addition of specifications and ratings to cover the cutout recloser and its special requirements.
This standard has been jointly revised by Switchgear Committee of the IEEE Power and Energy Society, in cooperation with subcommittee 17A: High-voltage switchgear and controlgear with reference to IEEE Std C37.60-2012(E).
This publication is to be read in conjunction with IEC 62271-1:2007.

General Information

Status
Published
Publication Date
24-Sep-2012
Technical Committee
Drafting Committee
Current Stage
DELPUB - Deleted Publication
Completion Date
12-Feb-2019
Ref Project

Relations

Buy Standard

Standard
IEC 62271-111:2012 - High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV Released:9/25/2012
English language
129 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 62271-111
Edition 2.0 2012-09

IEEE C37.60
INTERNATIONAL
STANDARD
colour
inside
High-voltage switchgear and controlgear –
Part 111: Automatic circuit reclosers and fault interrupters for alternating current
systems up to 38 kV
All rights reserved. IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by the Institute of
Electrical and Electronics Engineers, Inc.

Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in writing from the IEC Central
Office.
Any questions about IEEE copyright should be addressed to the IEEE. Enquiries about obtaining additional rights to

this publication and other information requests should be addressed to the IEC or your local IEC member National
Committee.
IEC Central Office Institute of Electrical and Electronics Engineers, Inc.
3, rue de Varembé 3 Park Avenue
CH-1211 Geneva 20 New York, NY 10016-5997
Switzerland United States of America
Tel.: +41 22 919 02 11 stds.info@ieee.org
Fax: +41 22 919 03 00 www.ieee.org
info@iec.ch
www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.

IEC 62271-111
Edition 2.0 2012-09
IEEE C37.60™
INTERNATIONAL
STANDARD
colour
inside
High-voltage switchgear and controlgear –

Part 111: Automatic circuit reclosers and fault interrupters for alternating current

systems up to 38 kV
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XF
ICS 29.130.10 ISBN 978-2-83220-332-3

– 2 – IEC 62271-111:2012(E)
IEEE Std C37.60-2012(E)
CONTENTS
FOREWORD . 11

1 Overview . 14

1.1 Scope . 14

1.2 Normative references . 14

2 Normal and special service conditions . 15

2.101 General . 15

2.102 Normal service conditions . 16
2.102.1 Indoor switchgear and controlgear . 16
2.102.2 Outdoor switchgear and controlgear . 16
2.103 Special service conditions . 17
2.103.1 General . 17
2.103.2 Altitude . 17
2.103.3 Pollution . 17
2.103.4 Temperature and humidity . 18
2.103.5 Vibrations, shock, or tilting . 18
2.103.6 Wind speed . 18
2.103.7 Other special (unusual) service conditions . 18
3 Terms and definitions . 18
3.1 General terms . 19
3.2 Assemblies of switchgear and controlgear . 21
3.3 Parts of assemblies . 21
3.4 Switching devices . 21
3.5 Parts of switchgear and controlgear . 21
3.6 Operation . 21
3.7 Characteristic quantities . 22
3.8 Index of definitions . 23
4 Ratings . 23
4.1 Rated voltage (U ) . 24
r
4.2 Rated insulation level . 25
4.3 Rated frequency (f ) . 26
r
4.4 Rated normal current and temperature rise. 26
4.4.1 Rated normal current (I ) . 26

r
4.4.2 Temperature rise . 27
4.4.3 Particular points of Table 4 . 29
4.5 Rated short-time withstand current (I ) . 30
k
4.6 Rated peak withstand current (I ) . 31
p
4.7 Rated duration of short-circuit (t ) . 31
k
4.8 Rated supply voltage of closing and opening devices and of auxiliary and
control circuits (U ) . 31
a
4.9 Rated supply frequency of closing and opening devices and of auxiliary
circuits . 31
4.10 Rated pressure of compressed gas supply for controlled pressure systems . 31
4.11 Rated filling levels for insulation and/or operation. 31
4.101 Rated minimum tripping current (I ) . 31
>min
4.102 Rated symmetrical interrupting current (short-circuit breaking current) . 32
Published by IEC under license from IEEE. © 2012 IEEE. All rights reserved.

IEEE Std C37.60-2012(E)
4.103 Transient recovery voltage related to rated symmetrical interrupting

current . 32

4.103.1 General . 32

4.103.2 Representation of TRV waves . 32

4.103.3 Representation of TRV . 33

4.103.4 Standard values of TRV related to the rated short-circuit breaking

current . 34

4.103.4.1 General . 34

4.103.4.2 First-pole-to-clear factor (k ) . 35
pp
4.103.4.3 Rate of rise of recovery voltage (RRRV) . 36
4.104 Rated symmetrical making current (short-circuit making current) . 43
4.105 Rated operating sequence . 45
4.106 Rated line and cable charging interrupting currents . 45
5 Design and construction . 45
5.1 Requirements for liquids in switchgear and controlgear . 45
5.1.1 Liquid level . 45
5.1.2 Liquid quality . 46
5.1.3 Oil sampling provision (submersible reclosers/FIs) . 46
5.2 Requirements for gases in switchgear and controlgear . 46
5.3 Earthing of switchgear and controlgear . 46
5.4 Auxiliary and control equipment . 46
5.5 Dependent power operation . 46
5.6 Stored energy operation . 46
5.7 Independent manual operation or power operation (independent unlatched
operation) . 46
5.8 Operation of releases . 47
5.8.1 Shunt closing release . 47
5.8.2 Shunt opening release . 47
5.8.3 Capacitor operation of shunt releases . 47
5.8.4 Under-voltage release . 47
5.9 Low- and high- pressure interlocking devices and monitoring devices . 47
5.10 Nameplates . 48
5.11 Interlocking devices . 49
5.12 Position indication . 50
5.13 Degrees of protection provided by enclosures . 50

5.13.1 Protection of persons against access to hazardous parts and
protection of the equipment against ingress of solid foreign
objects (IP coding) . 50
5.13.2 Protection against ingress of water (IP coding) . 50
5.13.3 Protection of equipment against mechanical impact under normal
service conditions (IK coding) . 50
5.13.101 Enclosure design and coating system requirements . 50
5.14 Creepage distances for outdoor insulators . 50
5.15 Gas and vacuum tightness . 51
5.15.1 Controlled pressure systems for gas . 51
5.15.2 Closed pressure systems for gas . 51
5.15.3 Sealed pressure systems . 51
5.15.101 Design and withstand . 51
5.15.102 Leak rate . 51
Published by IEC under license from IEEE. © 2012 IEEE. All rights reserved.

– 4 – IEC 62271-111:2012(E)
IEEE Std C37.60-2012(E)
5.16 Liquid tightness . 52

5.17 Fire hazard (flammability) . 52

5.18 Electromagnetic compatibility (EMC) .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.