EN 50377-14-1:2018
(Main)Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 14-1: Simplex and duplex cords made from simplex plugs with cylindrical ferrules, using EN 60793 2 50 single-mode B1 or B6 fibre for Category C according to EN 61753 1
Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 14-1: Simplex and duplex cords made from simplex plugs with cylindrical ferrules, using EN 60793 2 50 single-mode B1 or B6 fibre for Category C according to EN 61753 1
1.1 Product definition This standard contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements for an assembled single mode cord with cylindrical ferruled connectors to meet in order for it to be categorized as an EN standard product. Since different variants and grades of performance are permitted, product marking details are given in 4.5 and Clause 5. 1.2 Intermateability of the plugs Although all products conforming to the requirements of this standard are meant to intermate, the resulting level of random attenuation performance will only be expected in accordance with Table 1. The intention is that this will be true irrespective of the manufacturing source(s) of the product. When intermating plug variants having different attenuation grades as specified in EN 61755 1, the resulting level of attenuation cannot be ensured to be any better than the worst attenuation grade. The intermating of a grade C plug with a grade B plug will result in a grade C level of random attenuation performance. Table 1 — Ensured level of random attenuation Plug variant / Attenuation grade Plug 2 C B Plug 1 C C C B C B 1.3 Operating environment The tests selected combined with the severities and durations are representative of an EN 61753 1 Category C environment. 1.4 Reliability Whilst the anticipated service life expectancy of the product in this environment is 20 years, compliance with this standard does not guarantee the reliability of the product. This should be predicted using a recognized reliability assessment programme. 1.5 Quality assurance Compliance with this standard does not guarantee the manufacturing consistency of the product. This should be maintained using a recognized quality assurance programme.
Steckverbindersätze und Verbindungsbauelemente für Lichtwellenleiter-Datenübertragungssysteme - Produktnormen - Teil 14-1: Simplex- und Duplex-Kabel mit Simplex-Steckverbindern mit zylindrischen Ferrulen mit Einmodenfasern der Kategorie B1 oder B6 nach EN 60793-2-50 für Kategorie C nach EN 61753-1
1.1 Produktdefinition Diese Norm enthält die Anfangsanforderungen, die Maßanforderungen, die optischen und mechanischen Anforderungen am Anfang der Lebensdauer sowie die umweltbezogenen Anforderungen an das Betriebsverhalten, die ein konfektioniertes Einmodenkabel mit Steckverbindern mit zylindrischen Ferrulen erfüllen muss, um als EN-Normprodukt eingestuft zu werden. Da verschiedene Varianten und Leistungsklassen zulässig sind, werden in 3.5 und Abschnitt 4 Einzelheiten zur Produktkennzeichnung angegeben. 1.2 Steckbarkeit der Steckverbinder Obwohl alle Produkte, die den Anforderungen dieser Norm entsprechen, als steckbar vorgesehen sind, werden die resultierenden Pegel der zufälligen Dämpfung nur nach Tabelle 1 zugesichert. Das Ziel ist die Einhaltung der Anforderungen unabhängig von der/den Herstellungsquelle(n) des Produktes. Beim Stecken von Steckverbindervarianten mit unterschiedlichen Dämpfungsklassen nach EN 61755 1 kann nicht sichergestellt werden, dass der resultierende Dämpfungspegel besser ist als die schlechteste Dämpfungsklasse. Die Steckung eines Steckverbinders der Klasse C mit einem Steckverbinder der Klasse B ergibt ein zufälliges Dämpfungsverhalten der Klasse C. (...) 1.3 Betriebsumgebung Die ausgewählten Prüfungen zusammen mit den Prüfschärfen und Prüfdauern gelten für Umgebungen der Kategorie C nach EN 61753 1. 1.4 Zuverlässigkeit Obwohl die Lebensdauererwartung für das Produkt in dieser Umgebung 20 Jahre beträgt, garantiert die Einhaltung dieser Norm nicht die Zuverlässigkeit des Produktes. Diese sollte mit einem anerkannten Zuverlässigkeitsbewertungsprogramm beurteilt werden. 1.5 Qualitätssicherung Die Einhaltung dieser Norm sichert nicht die Beständigkeit der Herstellung des Produktes. Diese sollte mit einem anerkannten Qualitätssicherungsprogramm sichergestellt werden.
Jeux de connecteurs et composants d'interconnexion à utiliser dans les systèmes de communication par fibres optiques - Spécifications de produit - Partie 14 1: Cordons simplex et duplex constitués de fiches simplex avec férules cylindriques, utilisant les fibres unimodales B1 ou B6 de l’EN 60793-2-50 pour la catégorie C conformément à l’EN 61753-1
Konektorski sestavi in povezovalne komponente za uporabo v optičnih komunikacijskih sistemih - Specifikacije izdelka - 14-1. del: Simpleksne in dupleksne vrvice, izvedene iz simpleksnih vtičev z valjastimi tulkami z uporabo EN 60793-2-50 za enorodno vlakno B1 ali B6 za kategorijo C v skladu z EN 61753-1
1.1 Opredelitev izdelka
Ta standard vsebuje začetne dimenzijske, optične, mehanske in okoljske zahteve, ki jih mora na začetku svoje življenjske dobe izpolnjevati enorodna vrvica s konektorji z valjastimi tuljkami, da se lahko kategorizira kot izdelek v skladu s standardom EN.
Ker so dovoljene različne izvedbe in stopnje delovanja, so podrobnosti o označevanju izdelkov podane v točkah 3.5 in 4.
1.2 Medsebojna združljivost vtičev
Čeprav bi naj bili vsi izdelki, ki ustrezajo zahtevam iz tega standarda, medsebojno združljivi, bo posledična raven naključnega slabljenja zagotovljena le v skladu s Tabelo 1. Namen tega je, da bo tako ne glede na vir(e) proizvodnje izdelka.
Pri medsebojnem združevanju različic vtičev z različnimi razredi slabljenja, kot je določeno v standardu EN 61755 1, ni mogoče zagotoviti, da bo posledična raven slabljenja boljša od najslabšega razreda slabljenja.
Posledica medsebojne združitve vtiča razreda C z vtičem razreda B bo raven naključnega slabljenja z razredom C.
(...)
1.3 Delovno okolje
Izbrani preskusi skupaj z zahtevnostjo in trajanjem predstavljajo okolje kategorije C iz standarda EN 61753 1.
1.4 Zanesljivost
Medtem ko znaša pričakovana tehnična življenjska doba izdelka v tem okolju 20 let, skladnost s tem standardom ne zagotavlja zanesljivosti izdelka. To naj bi napovedali v okviru priznanega programa za oceno zanesljivosti.
1.5 Zagotavljanje kakovosti
Skladnost s tem standardom ne zagotavlja doslednosti izdelave izdelka. To naj bi vzdrževali v okviru priznanega programa za zagotavljanje kakovosti.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2018
1DGRPHãþD
SIST EN 50377-14-1:2011
.RQHNWRUVNLVHVWDYLLQSRYH]RYDOQHNRPSRQHQWH]DXSRUDERYRSWLþQLK
NRPXQLNDFLMVNLKVLVWHPLK6SHFLILNDFLMHL]GHONDGHO 6LPSOHNVQHLQ
GXSOHNVQHYUYLFHL]YHGHQHL]VLPSOHNVQLKYWLþHY]YDOMDVWLPLWXONDPL]XSRUDER(1
]DHQRURGQRYODNQR%DOL%]DNDWHJRULMR&YVNODGX](1
Connector sets and interconnect components to be used in optical fibre communication
systems - Product specifications - Part 14 1: Simplex and duplex cords made from
simplex plugs with cylindrical ferrules, using EN 60793-2-50 singlemode B1 or B6 fibre
for Category C according to EN 61753-1
Steckverbindersätze und Verbindungsbauelemente für Lichtwellenleiter-
Datenübertragungssysteme - Produktnormen - Teil 14-1: Simplex- und Duplex-Kabel mit
Simplex-Steckverbindern mit zylindrischen Ferrulen mit Einmodenfasern vom Typ B1
oder B6 nach EN 60793-2-50 für Kategorie C nach EN 61753-1
-HX[GHFRQQHFWHXUVHWFRPSRVDQWVG
LQWHUFRQQH[LRQjXWLOLVHUGDQVOHVV\VWqPHVGH
FRPPXQLFDWLRQSDUILEUHVRSWLTXHV6SpFLILFDWLRQVGHSURGXLW3DUWLH &RUGRQV
VLPSOH[HWGXSOH[FRPSRUWDQWGHVILFKHVVLPSOH[PXQLHVGHIpUXOHVF\OLQGULTXHVXWLOLVDQW
ODILEUH%RX%XQLPRGDOHVHORQO
(1
Ta slovenski standard je istoveten z: EN 50377-14-1:2018
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 50377-14-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2018
ICS 33.180.20 Supersedes EN 50377-14-1:2011
English Version
Connector sets and interconnect components to be used in
optical fibre communication systems - Product specifications -
Part 14-1: Simplex and duplex cords made from simplex plugs
with cylindrical ferrules, using EN 60793 2 50 single-mode B1 or
B6 fibre for Category C according to EN 61753-1
Jeux de connecteurs et composants d'interconnexion à Steckverbindersätze und Verbindungsbauelemente für
utiliser dans les systèmes de communication par fibres Lichtwellenleiter-Datenübertragungssysteme -
optiques - Spécifications de produit - Partie 14 1: Cordons Produktnormen - Teil 14-1: Simplex- und Duplex-Kabel mit
simplex et duplex constitués de fiches simplex avec férules Simplex-Steckverbindern mit zylindrischen Ferrulen mit
cylindriques, utilisant les fibres unimodales B1 ou B6 de Einmodenfasern vom Typ B1 oder B6 nach EN 60793-2-50
l'EN 60793-2-50 pour la catégorie C conformément à l'EN für Kategorie C nach EN 61753-1
61753-1
This European Standard was approved by CENELEC on 2018-05-14. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50377-14-1:2018 E
Contents Page
European foreword . 4
1 Scope . 6
1.1 Product definition. 6
1.2 Intermateability of the plugs . 6
1.3 Operating environment . 6
1.4 Reliability . 6
1.5 Quality assurance. 6
2 Normative references . 6
3 Terms and definitions . 8
4 Description . 8
4.1 General . 8
4.2 Plug . 8
4.3 Cable . 8
4.4 Materials . 8
4.5 Marking . 8
5 Variants. 9
6 Dimensional requirements . 10
6.1 Outline dimensions . 10
7 Tests . 10
7.1 Sample size . 10
7.2 Test and measurement methods . 10
7.3 Test sequence . 10
7.4 Pass/fail criteria . 11
8 Test report . 11
9 Product qualification requirements . 11
9.1 Dimensional and marking requirements . 11
9.2 Optical performance requirements . 11
9.3 Fibre optic connector end face . 12
9.4 Mechanical performance requirements . 13
9.5 Environmental performance requirements . 15
Annex A (normative) Tests, sample size and product sourcing requirements . 16
Bibliography . 17
Figures
Figure 1 — Length of cord . 10
Tables
Table 1 — Ensured level of random attenuation . 6
Table 2 — XXX and XXX variants . 9
1 4
Table 3 — X and X variants . 9
2 5
Table 4 — X and X variants . 9
3 6
Table 5 — XXX variants . 9
Table 6 — X variants . 9
Table 7 — XX variants . 10
Table 8 — Optical performance requirements . 12
Table 9 — End face requirements . 13
Table 10 — Mechanical performance requirements . 13
Table 11 — Environmental performance requirements . 15
Table A.1 — Test, sample size and sourcing . 16
European foreword
This document (EN 50377-14-1:2018) has been prepared by CLC/TC 86BXA “Fibre optic interconnect,
passive and connectorised components”.
The following dates are fixed:
• latest date by which this document has (dop) 2019-02-14
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2019-05-14
standards conflicting with this document
have to be withdrawn
This document supersedes EN 50377-14-1:2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Connector sets and interconnect components to be used in optical fibre communication
systems – product specifications
Part 14–1: Simplex and duplex cords made from simplex plugs with cylindrical ferrules, using
EN 60793-2-50 single-mode B1 or B6 fibre for Category C according to EN 61753-1
Description Performance
Fibre category: EN 60793-2-50 Application: For use indoors (EN
Types B1 and B6 Category C: controlled
environment)
Cable type: EN 60794-2-50 Attenuation B: ≤ 0,12 dB mean
EN 60794-2-51 grades: ≤ 0,25 dB for ≥ 97 %
(random mate) of measurements
C: ≤ 0,25 dB mean
≤ 0,50 dB for ≥ 97 %
of measurements
Return loss grade: 1: ≥ 60 dB
(random mate) 2: ≥ 45 dB
Related documents:
EN 50377 series Connector sets and interconnect components to be used in optical fibre
communication systems – Product specifications
EN 60793-2-50 Optical fibres – Part 2–50: Product specifications – Sectional specification for
category B single-mode fibres (IEC 60793-2-50)
EN 60794-2-50 Optical fibre cables – Part 2–50: Indoor cables – Family specification for
simplex and duplex cables for use in terminated cable assemblies
(IEC 60794-2-50)
EN 60794-2-51 Indoor optical fibre cables – Part 2–51: Detail specification for simplex and
duplex cables for use in patchcords for controlled environment
EN 61300 series Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures (IEC 61300 series)
EN 61753-1 Fibre optic interconnecting devices and passive components performance
standard – Part 1: General and guidance for performance standards
(IEC 61753-1)
Outline and maximum dimensions:
1 Scope
1.1 Product definition
This document contains the initial, start of life dimensional, optical, mechanical and environmental performance
requirements for an assembled single mode cord with cylindrical ferruled connectors to meet in order for it to
be categorized as an EN standard product.
Since different variants and grades of performance are permitted, product marking details are given in 4.5 and
Clause 5.
1.2 Intermateability of the plugs
Although all products conforming to the requirements of this standard are meant to intermate, the resulting
level of random attenuation performance will only be expected in accordance with Table 1. The intention is
that this will be true irrespective of the manufacturing source(s) of the product.
When intermating plug variants having different attenuation
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.