EN IEC 61439-2:2021/FprAA:2025

SLOVENSKI STANDARD
01-marec-2024
Sestavi nizkonapetostnih stikalnih in krmilnih naprav - 2. del: Sestavi močnostnih
stikalnih in krmilnih naprav - Dopolnilo AA
Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and
controlgear assemblies
Niederspannungs-Schaltgerätekombinationen - Teil 2: Energie-
Schaltgerätekombinationen
Ensembles d'appareillage à basse tension - Partie 2: Ensembles d'appareillage de
puissance
Ta slovenski standard je istoveten z: EN IEC 61439-2:2021/prAA:2023
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD DRAFT
EN IEC 61439-2:2021
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
November 2023
ICS 29.130.20 -
English Version
Low-voltage switchgear and controlgear assemblies - Part 2:
Power switchgear and controlgear assemblies
Ensembles d'appareillage à basse tension - Partie 2: Niederspannungs-Schaltgerätekombinationen - Teil 2:
Ensembles d'appareillage de puissance Energie-Schaltgerätekombinationen
This draft amendment prAA, if approved, will modify the European Standard EN IEC 61439-2:2021; it is submitted to CENELEC members
for enquiry.
Deadline for CENELEC: 2024-02-16.

It has been drawn up by CLC/BTTF 170-1.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 75166 Ref. No. EN IEC 61439-2:2021/prAA:2023 E

EN IEC 61439-2:2021/prAA:2023 (E)

Contents Page
1 European foreword . 3
2 1 Modification to Annex ZA, "Normative references to international publications with their
3 corresponding European publications" . 4
4 2 Replacement of Annex ZZ, "Relationship between this European standard and the safety
5 objectives of Directive 2014/35/EU [2014 OJ L96] aimed to be covered" . 4
EN IEC 61439-2:2021/prAA:2023 (E)
6 European foreword
7 This document (EN IEC 61439-2:2021/prAA:2023) has been prepared by CLC/BTTF 170-1 "Common
8 modifications to EN IEC 61439-1:2021 and EN IEC 61439-2:2021".
9 This document is currently submitted to the Enquiry.
10 The following dates are proposed:
• latest date by which the existence of this (doa) dor + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dor + 36 months
conflicting with this document have to be (to be confirmed or
withdrawn modified when voting)
11 This document will amend EN 61439-2:2021.
12 This document has been prepared under a standardization request addressed to CENELEC by the European
13 Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
14 Member States.
15 For the relationship with EU Legislation, see informative Annexes ZZA and ZZB, which are an integral part of
16 this document.
EN IEC 61439-2:2021/prAA:2023 (E)

17 1 Modification to Annex ZA, "Normative references to international publications
18 with their corresponding European publications"
19 Replace the following references:
Publication Year Title EN/HD Year
IEC 60204-1 2016 Safety of machinery – Electrical equipment of EN 62204-1 2018
machines – Part 1: General requirements
IEC 61439-1 2020 Low-voltage switchgear and controlgear assemblies – EN IEC 61439-1 2021
Part 1: General rules
+ A11 —
IEC 62262 2002 Degrees of protection provided by enclosures for EN 62262 2002
electrical equipment against external mechanical
impacts (IK code)
+ A1 2021
20 2 Replacement of Annex ZZ, "Relationship between this European standard and the
21 safety objectives of Directive 2014/35/EU [2014 OJ L96] aimed to be covered"
22 Replace Annex ZZ with the following Annexes ZZA and ZZB:
23 “
...