AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements

This international Standard specifies performance requirements for electronic control gear for use on a.c. at 50 Hz or 60 Hz and/or d.c. supplies, both up to 1 000 V, with operating frequencies deviating from the supply frequency, associated with fluorescent lamps as specified in IEC 60081 and IEC 60901, and other fluorescent lamps for high-frequency operation.
NOTE 1 Tests in this standard are type tests. Requirements for testing individual control gear during production are not included.
NOTE 2 There are regional standards regarding the regulation of mains current harmonics and immunity for endproducts like luminaires and independent control gear. In a luminaire, the control gear is dominant in this respect. Control gear, together with other components, should comply with these standards.

Wechsel- und/oder gleichstromversorgte elektronische Betriebsgeräte für röhrenförmige Leuchtstofflampen - Anforderungen an die Arbeitsweise

Appareillages électroniques alimentés en courant alternatif et/ou continu pour lampes tubulaires à fluorescence - Exigences de performances

Izmenično napajane elektronske predstikalne naprave za cevaste fluorescenčne svetilke - Tehnične zahteve

Ta mednarodni standard določa tehnične zahteve za elektronske predstikalne naprave za
uporabo pri izmeničnem 50 Hz ali 60 Hz in/ali enosmernem napajanju do 1000 V, s frekvencami delovanja, ki odstopajo od frekvenc napajanja, povezanimi s fluorescenčnimi svetilkami, kot je določeno v IEC 60081 in IEC 60901 in drugimi fluorescenčnimi svetilkami za visokofrekvenčno delovanje.
OPOMBA 1: Preskusi v tem standardu so tipski. Zahteve za preskušanje posameznih predstikalnih naprav med proizvodnjo niso vključene.
OPOMBA 2: Glede ureditve harmonik toka v omrežjih ter odpornosti končnih proizvodov, kot so svetila in neodvisne predstikalne naprave, obstajajo regijski standardi. Pri sijalki v zvezi s tem prevladuje predstikalna naprava.
Predstikalna naprava in druge komponente morajo biti v skladu s temi standardi.

General Information

Status
Published
Publication Date
27-Oct-2011
Current Stage
6060 - Document made available - Publishing
Start Date
28-Oct-2011
Completion Date
28-Oct-2011

Relations

Effective Date
29-Jan-2023
Corrigendum

EN 60929:2011/AC:2012

English language
1 pages
Preview
Preview
e-Library read for
1 day

Frequently Asked Questions

EN 60929:2011/AC:2011 is a corrigendum published by CLC. Its full title is "AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements". This standard covers: This international Standard specifies performance requirements for electronic control gear for use on a.c. at 50 Hz or 60 Hz and/or d.c. supplies, both up to 1 000 V, with operating frequencies deviating from the supply frequency, associated with fluorescent lamps as specified in IEC 60081 and IEC 60901, and other fluorescent lamps for high-frequency operation. NOTE 1 Tests in this standard are type tests. Requirements for testing individual control gear during production are not included. NOTE 2 There are regional standards regarding the regulation of mains current harmonics and immunity for endproducts like luminaires and independent control gear. In a luminaire, the control gear is dominant in this respect. Control gear, together with other components, should comply with these standards.

This international Standard specifies performance requirements for electronic control gear for use on a.c. at 50 Hz or 60 Hz and/or d.c. supplies, both up to 1 000 V, with operating frequencies deviating from the supply frequency, associated with fluorescent lamps as specified in IEC 60081 and IEC 60901, and other fluorescent lamps for high-frequency operation. NOTE 1 Tests in this standard are type tests. Requirements for testing individual control gear during production are not included. NOTE 2 There are regional standards regarding the regulation of mains current harmonics and immunity for endproducts like luminaires and independent control gear. In a luminaire, the control gear is dominant in this respect. Control gear, together with other components, should comply with these standards.

EN 60929:2011/AC:2011 is classified under the following ICS (International Classification for Standards) categories: 29.140.30 - Fluorescent lamps. Discharge lamps. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 60929:2011/AC:2011 has the following relationships with other standards: It is inter standard links to EN 60929:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 60929:2011/AC:2011 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.XRUHVFHQþQHWechsel- und/oder gleichstromversorgte elektronische Betriebsgeräte für röhrenförmige Leuchtstofflampen - Anforderungen an die ArbeitsweiseAppareillages électroniques alimentés en courant alternatif et/ou continu pour lampes tubulaires à fluorescence - Exigences de performancesAC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements29.140.30Fluorescent lamps. Discharge lampsICS:Ta sl
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...