EN 62453-1:2017
(Main)Field Device Tool (FDT) interface specification - Part 1: Overview and guidance
Field Device Tool (FDT) interface specification - Part 1: Overview and guidance
IEC 62453-1:2016 presents an overview and guidance for the IEC 62453 series. It - explains the structure and content of the IEC 62453 series (see Clause 5); - provides explanations of some aspects of the IEC 62453 series that are common to many of the parts of the series; - describes the relationship to some other standards. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: introduction of a new implementation technology (defined in IEC 62453-42).
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 1: Überblick und Leitfaden (IEC 62453-1:2016)
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 1: Vue d'ensemble et guide
L'IEC 62453-1:2016 présente une vue générale et fournit un guide pour la série IEC 62453. Elle - explique la structure et le contenu de la série IEC 62453 (voir Article 5); - fournit des explications de certains aspects de la série IEC 62453 qui sont communs à beaucoup de parties de la série; - décrit la relation avec d'autres normes. Cette deuxième édition annule et remplace la première édition parue en 2009. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: introduction d'une nouvelle technologie de mise en œuvre (définie dans l'IEC 62453-42).
Specifikacija vmesnika orodja procesne naprave (FDT) - 1. del: Pregled in vodilo (IEC 62453-1:2016)
Ta del standarda IEC 62453 zajema pregled in smernice za skupino standardov IEC 62453. Zajema:
• razlago strukture in vsebine skupine standardov IEC 62453 (glej točko 5);
• razlago nekaterih vidikov skupine standardov IEC 62453, ki so skupni številnim delov skupine;
• opis povezav z nekaterimi drugimi standardi.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2017
1DGRPHãþD
SIST EN 62453-1:2010
Specifikacija vmesnika orodja procesne naprave (FDT) - 1. del: Pregled in vodilo
(IEC 62453-1:2016)
Field Device Tool (FDT) interface specification -- Part 1: Overwiew and guidance (IEC
62453-1:2016)
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 1: Überblick und Leitfaden - Teil
1: Überblick und Leitfaden (IEC 62453-1:2016)
Spécification des interfaces des outils des dispositifs de terrain (FDT) -- Partie 1: Vue
générale et recommandations (IEC 62453-1:2016)
Ta slovenski standard je istoveten z: EN 62453-1:2017
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62453-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2017
ICS 25.040.40; 35.100.05; 35.110 Supersedes EN 62453-1:2009
English Version
Field Device Tool (FDT) interface specification - Part 1:
Overview and guidance
(IEC 62453-1:2016)
Spécification des interfaces des outils des dispositifs de Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 1:
terrain (FDT) - Partie 1: Vue d'ensemble et guide Überblick und Leitfaden - Teil 1: Überblick und Leitfaden
(IEC 62453-1:2016) (IEC 62453-1:2016)
This European Standard was approved by CENELEC on 2017-01-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62453-1:2017 E
European foreword
The text of document 65E/333/CDV, future edition 2 of IEC 62453-1, prepared by SC 65E “Devices
and integration in enterprise systems” of IEC/TC 65 “Industrial process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be (dop) 2017-10-20
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2020-01-20
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62453-1:2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62453-1:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61131 (Series) NOTE Harmonized as EN 61131 (Series)
IEC 61131-3 NOTE Harmonized as EN 61131-3
IEC 61158-1 NOTE Harmonized as EN 61158-1
IEC 61375-3-3 NOTE Harmonized as EN 61375-3-3
IEC 61499 (Series) NOTE Harmonized as EN 61499 (Series)
IEC 61499-1 NOTE Harmonized as EN 61499-1
IEC 61784-1 NOTE Harmonized as EN 61784-1
IEC 61784-2 NOTE Harmonized as EN 61784-2
IEC 61784 (Series) NOTE Harmonized as EN 61784 (Series)
IEC 61800-7-1 NOTE Harmonized as EN 61800-7-1
IEC 61800-7-2 (Series) NOTE Harmonized as EN 61800-7-2 (Series)
IEC 61800-7-3 (Series) NOTE Harmonized as EN 61800-7-3 (Series)
IEC 61804-2 NOTE Harmonized as EN 61804-2
IEC 61804-3 NOTE Harmonized as EN 61804-3
IEC 61804-4 NOTE Harmonized as EN 61804-4
IEC 61850 (Series) NOTE Harmonized as EN 61850 (Series)
IEC 61915-1 NOTE Harmonized as EN 61915-1
IEC/TS 61970-2 NOTE Harmonized as CLC/TS 61970-2
IEC 62026 (Series) NOTE Harmonized as EN 62026 (Series)
IEC 62026-1 NOTE Harmonized as EN 62026-1
IEC 62264 (Series) NOTE Harmonized as EN 62264 (Series)
IEC 62402 NOTE Harmonized as EN 62402
IEC 62453 (Series) NOTE Harmonized as EN 62453 (Series)
IEC 62541 (Series) NOTE Harmonized as EN 62541 (Series)
IEC/TR 62541-1 NOTE Harmonized as CLC/TR 62541-1
IEC 62769 (Series) NOTE Harmonized as EN 62769 (Series)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61158 series Industrial communication networks - EN 61158 series
Fieldbus specifications
IEC 61784 series Industrial communication networks - EN 61784 series
Profiles
IEC 62453-1 ®
Edition 2.0 2016-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Field device tool (FDT) interface specification –
Part 1: Overview and guidance
Spécification des interfaces des outils des dispositifs de terrain (FDT) –
Partie 1: Vue d'ensemble et guide
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100.05; 35.110 ISBN 978-2-8322-3745-8
– 2 – IEC 62453-1:2016 IEC 2016
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms, definitions, symbols, abbreviations and conventions . 8
3.1 Terms and definitions . 8
3.2 Abbreviations . 13
3.3 Conventions . 14
4 FDT overview . 14
4.1 State of the art . 14
4.2 Objectives of FDT . 15
4.2.1 General features . 15
4.2.2 Device and module manufacturer benefits . 15
4.2.3 System manufacturer and integrator benefits . 16
4.2.4 Other applications . 16
4.3 FDT model . 16
4.3.1 General . 16
4.3.2 Frame Applications . 18
4.3.3 Device Type Manager . 19
4.3.4 Communication Channel concept . 20
4.3.5 Presentation object . 22
5 Structure of the IEC 62453 series . 22
5.1 Structure overview . 22
5.2 Part 2 – Concepts and detailed description . 24
5.3 Parts 3xy – Communication profile integration . 24
5.3.1 General . 24
5.3.2 Communication profile integration – IEC 61784 CPF 1 . 25
5.3.3 Communication profile integration – IEC 61784 CPF 2 . 25
5.3.4 Communication profile integration – IEC 61784 CP 3/1 and 3/2 . 25
5.3.5 Communication profile integration – IEC 61784 CP 3/4, CP 3/5 and 3/6 . 25
5.3.6 Communication profile integration – IEC 61784 CPF 6 . 25
5.3.7 Communication profile integration – IEC 61784 CPF 9 . 25
5.3.8 Communication profile integration – IEC 61784 CPF 15 . 25
5.4 Parts 4z – Object model integration profiles . 26
5.4.1 General . 26
5.4.2 Object model integration profile – Common object model (COM) . 26
5.4.3 Object model integration profile – Common language infrastructure
(CLI) . 26
5.5 Parts 51-xy/52-xy – Communication profile implementation . 26
5.5.1 General . 26
5.5.2 Communication profile implementation – IEC 61784 CPF 1. 26
5.5.3 Communication profile implementation – IEC 61784 CPF 2. 26
5.5.4 Communication profile implementation – IEC 61784 CP 3/1 and 3/2 . 27
5.5.5 Communication profile implementation – IEC 61784 CP 3/4, CP 3/5 and
3/6 . 27
IEC 62453-1:2016 IEC 2016 – 3 –
5.5.6 Communication profile implementation – IEC 61784 CPF 6. 27
5.5.7 Communication profile implementation – IEC 61784 CPF 9. 27
5.5.8 Communication profile implementation – IEC 61784 CPF 15 . 27
5.6 Parts 6z – DTM styleguides . 27
5.6.1 General . 27
5.6.2 Device Type Manager (DTM) styleguide for common object model . 27
5.6.3 Field Device Tool (FDT) styleguide for common language infrastructure . 27
6 Relation of the IEC 62453 series to other standardization activities . 27
7 Migration to DTM . 31
8 How to read IEC 62453 . 32
8.1 Architecture . 32
8.2 Dynamic behavior . 32
8.3 Structured data types . 33
8.4 Fieldbus communication. 33
Annex A (informative) UML notation . 34
A.1 General . 34
A.2 Cla
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.